Edition 01.2010 Method Parameters Norm requirements General data with v-groove all around thickness 8,0 mm width 396 mm length 396 mm panels per pack 10 m² per pack 1,5682 m²/pack tongue and groove system Uniclic Usage class EN 13329 UF1018: * some test methods are not fully applicable Class UF406: Class 21,22,23 & 31,32 CE EN 14041 notified body 0380-1161 PEFC PEFC label Warranty domestic use warranty conditions in each pack 25 year commercial use 5 year splash warranty yes Taber - wear resistance EN 13329 UF1018: UF406: >=4000 Wear class EN 13329 UF1018: * with overlay AC4 UF406: AC4 Moisture swelling EN 13329 after 24h immersion at 20°C 18% 10 % General aspect of installed flooring EN 13329 lipping <=0,15mm <=0,10 mm opening between joints <=0,20mm <=0,10 mm general flatness length concave<=0,50% convex<=1,00% convex<=1,00% general flatness width concave<=0,15% convex<=0,20% convex<=0,20% Impact resistance EN 13329 IC2 IC2 Scratch resistance EN 438-2, 25 Charge >= 3.0 N 5.0 N Staining EN 13329 group 1,2 class 5 class 5 group 3 class 4 class 5 Light fastness EN 13329 Blue reference class 6 > 6 Burning cigaret EN 438-2, 30 class 4 class 5 Displacement of furniture feet EN 424 foot 0,1mm/32kg foot 3mm/100 kg foot 2mm/100 kg Castor chairs EN 13329 25000 cycles Type W(EN 12529) Dimensional variations ISO 24339 variation length AND width <=0,10% Anti-static EN 14041 charge human body at 25% RH and 23°C <=2,0kV Slip resistance EN13893 DS Formaldehyde emission EN 717 E1 <0,025 ppm Thermal resistance ISO 8302 0,055 m².°K/W Underfloor heating with appropriate underlay Ask for specific information OK Impact sound reduction ISO 712/2 3mm PE Uniclic Lw = 18 dB Lw = 18 dB Fire classification EN 14041 Cfl - s1 Note: For all characteristics of the surface layer, a zone of 5mm along the edge is excluded UNILIN Flooring bvba - Ooigemstraat 3 - 8710 Wielsbeke - België E-mail: [email protected] Tel : +32 56 67 52 37 Fax : +32 56 67 52 39 Technical data sheet Quick-Step Quadra "UF…" no change no change no change no change Quick-Step values * with overlay class 32 concave<=0,50% concave<=0,15% 21,22,23 & 31,32*