- Catalogs
- QAWRUMS Ltd.
- RAEM2 IoT-AE Monitoring System
RAEM2 IoT-AE Monitoring System
RAEM2 IoT-AE Monitoring System
- Channel: Single channel
- Sampling Rate: 2MSPS
- Sampling Method: Time trigger
- Sampling Resolution: 16-bit
- Input Frequency: 10kHz-400KHz
- Preamp Power Supply: 28V
- System Noise: <30dB
- Dynamic Range: 70dB
- Protection Grade: IP67
- Max Signal: 100dB
- Sampling Length: Max. 15000 points
- Operating Voltage: 7.2V
- Analog Filter: 30kHz-175kHz
- Sleeping Current: 200uA
- AE Parameters: Amplitude, energy, RMS, ASL
- Working Temperature: -15°C to 60°C
- Digital Filter: Various configurations based on sampling rate
- Battery Life: 3 years with interval sampling mode
- Sensor: Internal sensor with built-in preamplifier (customizable)
- Data Output: Waveform, AE parameters, and parameter rating
- Communication Methods: 4G, Bluetooth, LoRa
- Power Supply: Built-in battery
- Installation: Magnetic base for metal surfaces
- Accessories: Internet antenna, Bluetooth antenna, power adapter
- Real-time display of waveform and AE parameters
- Quantitative testing results
- Auto alarm notification via SMS or email, Bluetooth onsite inspection
- Remote hardware configuration
- Stand-alone monitoring system, non-intrusive to equipment
- Unattended monitoring with auto alarms to PC via email or SMS
- Wireless data communication with multiple methods available
- Based on Linux OS for stable long-term operation
- Suitable for structural health and conditional monitoring
- Quantitative monitoring results for leakage rate, bridge cable break rate, etc.
- Customizable cloud server for data upload
- Bluetooth onsite inspection capability
Catalog excerpts
loT-AE Monitoring System RAEM2 is an integrated wireless unmanned industrial condition monitoring system with internal battery, AE sensor, and wireless communication module. It is well-suited for the continuous acoustic emission signals monitoring such as leakage and wear signals, and can automatically trigger alarm notifications to users when the detected object is in abnormal conditions. o Single channel, time triggering o Communications: 4G, LoRa, Bluetooth o Data transmission to local devices (PC, phones) and cloud servers Suitable for timing monitoring for continuous signals, eg. leakage or wear signals. QingCheng Ltd. All rights reserved. Email: [email protected] Website: www.aendt.com Address: 601-9,Building 3,232 KeZhu Road, HuangPu District, GuangZhou, China
Open the catalog to page 1
Brief introduction of IoT cloud platform: Real-time display of waveform and AE parameter. Quantitative testing results Remote configure hardware. Auto alarm notification via SMS or email, bluetooth onsite inspection Advantages: 1. Stand-alone monitoring system, no intrusive to your equipment. 2. Unattended monitoring, auto alarms to PC by email or SMS. 3. Wireless data communication, various communication methods available, 4G, LoRa, Bluetooth. 4. Based on Linux Operating System, long-term stable running. 5. Suitable for most structural health / conditional monitoring. 6. Quantitative monitoring...
Open the catalog to page 2All QAWRUMS Ltd. catalogs and technical brochures
RAEM1 USER’S MANUAL Operation Guide127 Pages
