PVP-A60P
PVP-A60P
The PVP-AxxxPWFLM1 is a solar module produced in Austria using modern production equipment. It features extra heavy solarglass of 3.9mm thickness, designed to withstand high wind and snow loads up to 5400Pa. The module offers a positive power tolerance of up to +3% and comes with a 10-year product warranty and performance guarantees of 90% for 10 years and 80% for 25 years. It is certified by IEC 61215 and IEC 61730 through TÜV Rheinland.
The module consists of 60 polycrystalline cells, each measuring 156x156mm. It is available in power ratings of 230, 235, and 240Wp. The module efficiency ranges from 14.3% to 14.9%. The frame is made of anodized aluminum, and the module dimensions are 1629mm in length, 989mm in width, and 40.5mm in height, with a weight of 21kg.
Under standard test conditions (STC), the maximum power output (Pmpp) is 230-240Wp, with a voltage at Pmpp (Vmpp) of 29.5-29.9V and a current at Pmpp (Impp) of 7.8-8.0A. The open circuit voltage (Voc) is 37.2-37.4V, and the short circuit current (Isc) is 8.4-8.5A. Under normal operating cell temperature (NOCT), the Pmpp is 165.9-173.1Wp, Vmpp is 24.5-25.2V, and Impp is 6.8-6.9A.
The module can handle a maximum mechanical load of 5400 N/m² and a system voltage of up to 1000V. It is classified under safety class II and can operate in temperatures ranging from -40°C to +85°C. The junction box is rated IP67, with Huber Suhner HA3 and Schottky type bypass diodes. The cable length is 1000mm with a cross-section of 4mm², and connectors are Radox Solar.
The datasheet complies with EN 50380 standards. It notes a minor reduction in efficiency under partial load conditions, achieving 95% of STC efficiency at 200W/m². The document advises reading safety and installation instructions before use and refers to the company's website for further details on warranty and delivery terms.
Catalog excerpts
Type: PVP-AxxxPWFLMI Produced in Austria with modern production equipment Extra heavy solarglass 3,9mm for high wind and snow load (5400Pa) Positive power tolerance: up to +3% 10 years product warranty 10 years performance guarantee 90% 25 years performance guarantee 80% Safety tested, Heavy Snow Load Periodic inspection Each PVP module is characterised by best performance data and high-quality materi- als. Produced in Austria with modern production equipment and highest manufacturing standards. Modules of A-Series achieve therefore highest requirements and best power September 2011 / Contact: PV Products GmbH: Wernersdorf 111, A-8551 Wies, Tel. +43 (0) 3466 43030-0, Fox-DW: -9, [email protected]
Open the catalog to page 1
800 W/m2; AM 1,5; normal operating cell temperature (NOCT) Minor reduction in efficiency under partial load conditions: at 200W/m2 95% of the STC efficiency (1000W/m2) is achieved thermal characteristics / temperature coefficient technical drawing mechanical data length width additional data Plus sorting safety class bypass diodes protection class junction box cable length/cross section measurement tolerance operating temperature Radox Solar component materials cell type polycrystalline 156x156 frame anodized aluminium drain hole These datasheet is not legally binding. Actual specifications and...
Open the catalog to page 2All PVP catalogs and technical brochures
BIPV-Module2 Pages
Greenhouse module2 Pages
1 7 5 / 1 8 0 / 1 8 5 W p2 Pages
2 9 0 / 2 9 5 / 3 0 0 W p2 Pages
PVP-A-ModulE2 Pages
PVP-GE-ModulE2 Pages
PVP-GExx2 Pages