2 9 0 / 2 9 5 / 3 0 0 W p

Product catalog summary

Product Overview:
The PVP-AxxxMWFLK3 is a high-performance solar module produced in Austria using modern production equipment. It features extra heavy solarglass (3.9mm) designed to withstand high wind and snow loads up to 5400Pa. The module offers a positive power tolerance of up to +3% and comes with a 10-year product warranty and performance guarantees of 90% for 10 years and 80% for 25 years. It is certified by IEC 61215 and IEC 61730 by TÜV Rheinland.

Specifications:
The module is a 72-cell monocrystalline type with power ratings of 290/295/300Wp. It has a module efficiency ranging from 15.0% to 15.6%. The electrical data under standard test conditions (STC) include a maximum power (Pmpp) of 290-300Wp, voltage at Pmpp (Vmpp) of 36.7-37.0V, and current at Pmpp (Impp) of 7.9-8.1A. The open circuit voltage (Voc) is 44.1-44.7V, and the short circuit current (Isc) is 8.6-8.7A.

Mechanical and Thermal Characteristics:
The module dimensions are 1949mm in length, 989mm in width, and 40.5mm in height, with a weight of 25kg. It can handle a maximum mechanical load of 5400 N/m² and a system voltage of 1000V. The operating temperature range is -40°C to +85°C. The thermal characteristics include a temperature coefficient of power (TK P) of -0.42%/K, voltage (TK Voc) of -0.32%/K, and current (TK Isc) of 0.047%/K, with a normal operating cell temperature (NOCT) of 47°C +/-2°C.

Additional Features:
The module includes a junction box with IP67 protection, three Schottky bypass diodes, and Radox Solar connectors. The cable length is 1000mm with a cross-section of 4mm². The module is classified under safety class II and has a maximum reverse current of 15A.

Important Notes:
The datasheet is not legally binding, and specifications may vary. Users are advised to read the safety and installation instructions before use. The warranty and general delivery terms are available on the PV Products GmbH website.

Catalog excerpts

Produced in Austria with modern production equipment Extra heavy solarglass 3,9mm for high wind and snow load (5400Pa) Positive power tolerance: up to +3% 10 years product warranty 10 years performance guarantee 90% 25 years performance guarantee 80% Safety tested, Heavy Snow Load Periodic inspection Each PVP module is characterised by best performance data and high-quality materi- als. Produced in Austria with modern production equipment and highest manufacturing standards. Modules of A-Series achieve therefore highest requirements and best power September 2011 / Contact: PV Products GmbH: Wernersdorf 111, A-8551 Wies, Tel. +43 (0) 3466 43030-0, Fox-DW: -9, [email protected]

Open the catalog to page 1

800 W/m2; AM 1,5; normal operating cell temperature (NOCT) Minor reduction in efficiency under partial load conditions: at 200W/m2 95% of the STC efficiency (1000W/m2) is achieved thermal characteristics / temperature coefficient mechanical data length width additional data Plus sorting safety class bypass diodes protection class junction box cable length/cross section measurement tolerance operating temperature Radox Solar component materials cell type monocrystalline 156x156 frame anodized aluminium technical drawing grounding hole mounting hole drain hole These datasheet is not legally binding....

Open the catalog to page 2

2 9 0 / 2 9 5 / 3 0 0 W p

2 9 0 / 2 9 5 / 3 0 0 W p

Catalog excerpts

All PVP catalogs and technical brochures