1 7 5 / 1 8 0 / 1 8 5 W p

Product catalog summary

Product Overview:
The PVP-AxxxPWFHM2 is a polycrystalline solar module produced in Austria using modern production equipment. It features extra heavy solarglass of 3.9mm thickness, designed to withstand high wind and snow loads up to 5400Pa. The module offers a positive power tolerance of up to +3% and comes with a 10-year product warranty and performance guarantees of 90% for 10 years and 80% for 25 years. It is certified by IEC 61215 and IEC 61730 by TÜV Rheinland.

Specifications:
The module consists of 48 polycrystalline cells, each measuring 156x156mm. It is available in power ratings of 175, 180, and 185Wp. The module efficiency ranges from 13.5% to 14.3%. The electrical data under standard test conditions (STC) include a maximum power (Pmpp) of 175-185Wp, voltage at Pmpp (Vmpp) of 23.0-23.6V, and current at Pmpp (Impp) of 7.6-7.9A. The open circuit voltage (Voc) is 29.4-29.9V, and the short circuit current (Isc) is 8.1-8.5A.

Mechanical and Thermal Characteristics:
The module dimensions are 1309mm in length, 989mm in width, and 40.5mm in height, with a weight of 17kg. It can handle a maximum mechanical load of 5400N/m² and a system voltage of 1000V. The operating temperature range is -40°C to +85°C. The thermal coefficients are -0.43%/K for power, -0.32%/K for voltage, and 0.049%/K for current, with a normal operating cell temperature (NOCT) of 44°C ±2°C.

Additional Features:
The module includes a Huber Suhner HA3 junction box with IP67 protection and Schottky bypass diodes. It has a cable length of 1000mm with a cross-section of 4mm² and Radox Solar connectors. The measurement tolerance is ±3%.

Important Notes:
This datasheet is not legally binding, and actual specifications may vary. PV Products reserves the right to change specifications without notice. Users are advised to read the safety and installation instructions before use. The datasheet complies with EN 50380 requirements.

Catalog excerpts

Produced in Austria with modern production equipment Extra heavy solarglass 3,9mm for high wind and snow load (5400Pa) Positive power tolerance: up to +3% 10 years product warranty 10 years performance guarantee 90% 25 years performance guarantee 80% Safety tested, Heavy Snow Load Periodic inspection Each PVP module is characterised by best performance data and high-quality materi- als. Produced in Austria with modern production equipment and highest manufacturing standards. Modules of A-Series achieve therefore highest requirements and best power September 2011 / Contact: PV Products GmbH: Wernersdorf 111, A-8551 Wies, Tel. +43 (0) 3466 43030-0, Fox-DW: -9, [email protected]

Open the catalog to page 1

800 W/m2; AM 1,5; normal operating cell temperature (NOCT) Minor reduction in efficiency under partial load conditions: at 200W/m2 95% of the STC efficiency (1000W/m2) is achieved thermal characteristics / temperature coefficient technical drawing mechanical data length width additional data Plus sorting safety class bypass diodes protection class junction box cable length/cross section measurement tolerance operating temperature Radox Solar component materials cell type polycrystalline 156x156 frame anodized aluminium mounting hole grounding hole drain hole These datasheet is not legally binding....

Open the catalog to page 2

1 7 5 / 1 8 0 / 1 8 5 W p

1 7 5 / 1 8 0 / 1 8 5 W p

Catalog excerpts

All PVP catalogs and technical brochures