data sheet properla facade coating
1Pages

proPERLA® Façade Coating Consumption Approx. 150ml/m2 per coat on smooth surfaces. Correspondingly more proPERLA® Façade Coating is a especially dirt-resistant and silicon on rough surfaces. Determine exact consumption quantities by testing. emulsion based exterior facade coating for optimum protection against Minimum temperature for application and drying + 5° C (air and subsurface). Where to use Highly weather resistant, particularly dirt-resistant exterior paint on mineral surfaces as well as renovation finishes on stable silicate and mat The previous coat must be completely dry before the next coat is dispersion paint coatings, synthetic resin plasters and intact thermal applied on the facade. Drying time increases accordingly in cool or moist insulation composite systems. Keeps facades dry to maximum depth Surface preparation: see reverse side. Performance features Primer coat: see reverse side. Water-soluble, low film tension, weather resistant according to VOB, Filling work (if applicable): Use a suitable Filler according to water repellent in conformance with DIN 4108, alkali resistant, highly permeable to water vapour, non-film forming, high hide, resistant to dirt First Coat: proPERLA® diluted up to 10% with water. and air pollutants, easy to use and highly resistant to fungus, moss and Second Coat: proPERLA®, diluted up to 10% with water. algae. Notes Binder type Do not use proPERLA® products with coating materials of other types Silicon resin emulsion, and special silan polymer such as silicate or dispersion paints or dispersion or silicate based full colour paints. Do not mix it with tinting concentrates. Gloss: Flat. Do not mix proPERLA® with other coating systems. Resilient facade Colour: see colour card. coatings with highly thermoplastic properties are not a suitable Tinting colours: Pastel colours. subsurface. They must be removed, e.g. by leaching. Spraying data: Airless. See EU Safety Data Sheet for detailed product information relevant for Nozzle size: 0.021 inch. Spray pressure: 150-200 bars. Thinner addition: up to 10% water. Cleaning of tools: Immediately after use with water. Application utilities Brush, roller, spray gun. Storage Cool, however above freezing. Seal opened containers well. This BECO TREAT Systems ApS information was compiled according to the state of the art and our present experience. It is intended to support craftsmen in selecting the proper materials and using them correctly. The information provided here does not release the user from the responsibility for checking the material for its suitability for the intended application, considering all object-related factors. New editions replace the information given here. Status: May 2013 Beco Treat Systems ApS, Nebelvej 15, 8700 Horsens, Denmark, VAT: DK40775064