Technical Specifications Overview

This document provides key technical specifications for the CP Series Multi-Processing Crushers by Promove srl, focusing on operational parameters and equipment dimensions.

1. Equipment Weights

• Working Weight: The operational weight of the crusher is specified, though exact values are not fully detailed in the excerpt.
• Carrier Weight: Weight of the carrier unit supporting the crusher is indicated but exact figures are not provided.

2. Hydraulic Parameters

• Oil Flow: The hydraulic oil flow rate ranges between 60 to 120 liters per minute.
• Working Pressure: Operating pressure is specified between 300 to 580 bar.
• Rotation Oil Flow: The oil flow for rotation motor is between 10 to 12 liters per minute.
• Rotation Pressure: Rotation motor pressure is around 100 bar.

3. Mechanical Dimensions and Forces

• Several dimensions are listed (A1, A2, A3, A4, B), with values such as 620 mm, 580 mm, 310 mm, and 1500 mm, likely corresponding to component sizes or operational clearances.
• Cylinder Force: The force exerted by the hydraulic cylinder is approximately 34 tons.

4. Product Identification and Contact

• Manufacturer: Promove srl
• Contact: +39 393 9163160
• Website: promovedemolition.com

Summary of Critical Parameters

Note: Some dimension values are missing or unspecified in the provided excerpt.

Recommendations and Usage Notes

Ensure hydraulic system parameters (flow and pressure) are maintained within specified ranges for optimal crusher performance. Verify carrier compatibility with crusher weight. Consult manufacturer for detailed installation and operational guidelines.