Technical Specifications Overview

This document provides the technical specifications for the CP Series Multi-Processing Crushers by Promove srl, revision dated April 2023.

Key Parameters

• Working Weight: The operational weight of the equipment is specified but exact values are not clearly indicated in the excerpt.
• Carrier Weight: Weight of the carrier machine is referenced but specific values are not detailed.
• Oil Flow and Pressure: - Working oil flow ranges between 15 to 22 liters per minute.
  - Working pressure is between 100 to 180 bar.
  - Rotation oil flow is 10 to 12 liters per minute.
  - Rotation pressure is 100 bar.
• Cylinder Force: The cylinder force is indicated as 67 tons.
• Dimensions: Various dimensions are listed in millimeters, including values such as 140 mm, 120 mm, 40 mm, 715 mm, 450 mm, 670 mm, 1800 mm, and 1510 mm, corresponding to different parts labeled A1 (PR), A2 (SC), A3 (FR), A4 (FR KIT), and B. These likely represent component sizes or installation parameters.

Model and Component Identification

The document references several component codes (A1 - PR, A2 - SC, A3 - FR, A4 - FR KIT, B) which correspond to parts or configurations of the crusher series.

Manufacturer Information

Promove srl is the manufacturer, with contact phone number +39 393 9163160 and website promovedemolition.com.

Summary of Critical Specifications

• Oil flow and pressure parameters are critical for hydraulic system compatibility.
• Cylinder force of 67 tons indicates the crushing power capacity.
• Dimensional data is essential for fitting and installation on carrier machines.

Notes

The document appears to be a technical specification sheet with multilingual headings (English, French, German) for international use. The data is presented in tabular form with min/max ranges for some parameters.