Promat PROMAFORM®

Product catalog summary

Introduction
Promat PROMAFORM® is a series of alumino silicate refractory ceramic fibre boards designed for high-temperature applications, with classification temperatures of 1200°C and 1400°C.

Advantages

Good thermal shock resistance
High mechanical strength
Low thermal conductivity
Easy to cut and handle

Applications

Kiln and furnace linings
Back-up insulation
Aluminium transfer launders
Refractory construction
Domestic heating appliances
Roller seals
Smelting and heat holding crucibles

Mechanical Properties

Property	Promat PROMAFORM® 1200	Promat PROMAFORM® 1400
Colour	White	White
Classification temperature	1200°C	1400°C
Nominal density	320kg/m³	270kg/m³
Linear shrinkage, 24 hours	2.7% at 1100°C	3.5% at 1300°C
Thermal conductivity	0.08W/mK at 400°C, 0.11W/mK at 600°C, 0.16W/mK at 800°C, 0.22W/mK at 1000°C	0.09W/mK at 400°C, 0.12W/mK at 600°C, 0.17W/mK at 800°C, 0.25W/mK at 1000°C
Loss on ignition	6.2%	6%

Typical Composition

Component	Promat PROMAFORM® 1200	Promat PROMAFORM® 1400
Al₂O₃	42.1%	33.3%
SiO₂	52.4%	42.7%
ZrO₂	-	13.2%
Organic	5.5%	4.0%

Standard Sizes

Thicknesses: 5, 10, 15, 20, 25, 40, 50, 60, 70, 80, 90, 100 mm
Width: 610 mm
Length: 1000 mm

Health and Safety
A safety data sheet is available and should be reviewed before handling the board. The product is not classified as dangerous, and no special provisions are required for transport or disposal. It can be disposed of with general building waste by a registered contractor.

Catalog excerpts

Promat PROMAFORM Refractory Ceramic Fibre Rigid Board • Kiln and furnace linings • Back-up insulation • Aluminium transfer launders • Refractory construction • Domestic heating appliances • Roller seals • Smelting and heat holding crucibles A safety data sheet is available from the Promat Technical Services Department and, as with any other materials, should be read before working with the board. The board provisions are required regarding the carriage and disposal of the product to landfill. They can be placed in an on-site skip with other general building waste which should be disposed of by Promat PROMAFORM® is a range of alumino silicate refractory ceramic fibre boards with classification /lechanical properties Promat PROMAFORM® 1200 Promat PROMAFORM® 140 Typical composition • Good thermal shock resistance • High mechanical strength The Sterling Centre, Eastern Road, Bracknell, Berkshire RG12 2TD - an EtGX GROUP if* company-

Open the catalog to page 1

All Promat catalogs and technical brochures

Archived catalogs

Promat MASTERBOARD®
6 Pages