Promat MONOLUX® A Rigid, Lightweight, Non-Combustible Board for Fire Resisting Constructions Applications include: G Single skin partitions G Cavity barriers and fire stops G Ducts and services protection G Duct inspection panels INTRODUCTION Promat MONOLUX® is a rigid, lightweight non-combustible building board for use in fire resisting constructions and linings. It is a high performance board which can be used in constructions providing up to 240 minutes fire resistance. Promat MONOLUX® is a suitable substrate for hard or soft veneers and can be edge screwed. G Fire door construction Application of a veneer allows fire resistance to be combined with high class decorative finishes. G Core board for decorative Promat MONOLUX® is a calcium silicate board reinforced with selected fibres and fillers. It is formulated without any inorganic fibres. Promat MONOLUX® is off-white in colour with a smooth sanded finish on both faces. It is easy to decorate with paints, wallpapers or tiles and is a suitable substrate for hard or soft plastics, metal foil or real timber veneers. Promat MONOLUX® has high dimensional stability and will not physically deteriorate in damp or humid conditions. The fire performance characteristics are not degraded by age or moisture. Promat MONOLUX® is rigid, robust and resistant to impact damage. When high levels of impact resistance are required, the board can be protected with a sheet metal veneer. It is supplied as rectangular boards with square cut edges. 12.7, 15.9, 19.1, 22.2, 25.4, 31.8 Length x width (mm) Nominal Weight 0.68kg/mm/m2 (at ambient moisture content 6%) TYPICAL APPLICATIONS Promat MONOLUX® is suitable for use in a wide range of fire resisting constructions providing up to 240 minutes fire resistance depending on the application and construction used. Promat MONOLUX® veneered with a high pressure laminate decorative finish provides additional impact resistance where required. For information on veneering or pre-veneered panels contact Promat UK Limited Technical Services Department on 01344 381 400. PERFORMANCE Fire Non-combustible to Euroclass A1 (EN 13501-1), BS 476: Part 4: 1970; Class 1 Surface Spread of Flame to BS 476: Part 7: 1987; Class 0 as defined in the Building Regulations. Will give off minimal toxic smoke of gases in the event of fire.

Promat MONOLUX® A Rigid, Lightweight, Non-Combustible Board for Fire Resisting Constructions Effect of Moisture Will absorb water causing some loss of strength which is fully recovered on drying. Moisture or SAFETY SHEET condensation will not dissolve out soluble materials and cause unsightly marks or efflorescence. A safety data sheet is available Resistant to the effects of moisture and does not rely on surface treatments to achieve moisture from Promat Technical Services Department and, as with any other Has high dimensional stability and will not sag or bow in high humidities. It can be fixed...