PROSTILT
24Pages

PROSTILT PEDESTAL AND SLAB SUPPORTS FOR PATIO DESIGN USING A SYSTEM

Pedestal and slab supports COMPLETE SYSTEM-BASED SOLUTION FOR CERAMIC AND STONE PATIOS The significance of outdoor areas, including gardens, patios, roof terraces and balconies as a place for everyday relaxation, is growing considerably More and more owners and modernisers are seeing the importance of improving their own premises with high quality outdoor areas. In terms of town planning, residential areas are becoming scarcer in the cities. With pedestal and slab supports, new areas can be created on roof terraces, where this has long been impossible up to now due to statics. Due to this...

PROSTILT pedestal supports THE ADVANTAGES AT A GLANCE 1.2 t High pressure-resistance The adjustable foot is in an extremely stable design with a maximum load capacity of 1.2 t Tilt stability / load distribution Optimum stability thanks to the support foot with a diameter of around 200 mm Variable installation heights Feet adjustable to four different heights offering a range of 27–170 mm for installation heights Infinitely variable height adjustment Thread adjustment range up to 50 mm Fine adjustment Simple and fast installation due to practically-orientated adjusting screw Side facing /...

When developing PROSTILT we consistently pursued the objective of designing the best pedestal supports for your projects and for your everyday use. Three factors are central to this: Quality: The best stability as well as convincing material characteristics Flexibility: Variable building usage options and simple handling Effectiveness: Intuitive system character as well as pre-assembly in the factory Stability of the covering Large contact area (0 1 30 mm), therefore more stability Practicality Stable joint bridge that is nevertheless easy to remove Convenient to lay Ergonomic...

How to achieve the upper limit of durability Extremely stable PROSTILT pedestal supports for heights from 27-170 mm ensure maximum flexibility. Sound impact and rubber granulate pads offer additional walking comfort and safety. 2. How to design ends and edging With the PROSTILT facing solution the design of edge profiles is included in the system. Clever stainless steel clips secure the connection and ensure a perfect finish. 3. How to connect the patio to the house Specially developed stainless steel clips as spacers with a neoprene pad fix the slabs and serve as an extension medium to the...

PROSTILT – the system-based solution OBJECTIVES AND SOLUTIONS FOR YOUR PATIO CONSTRUCTION

1. The PROSTILT system set up is designed in such a way that an even look to the joints and improved walking comfort are automatically the result. Coupled with extremely good handling for those working on it, there is a secure feeling all round for all those involved. 2. The obvious demarcation of geometric areas is a feature of modern architecture. With PROSTILT you can skilfully plan and build the surface covering of the patio and a visually adapted riser with the same material. The stainless steel facing used therefore is an expression of value, function and design. 3. The PROSTILT...

PROSTILT – the aesthetic solution FUNCTIONAL DESIGN FOR DEMANDING LIFESTYLES 3

PROSTILT with facing Laying / processing Two clips have been developed to hold the PROSTILT facing profile (A). The lower clip (B) is positioned under the pedestal support and holds the riser in the lower area. The upper clip (C) is laid on the plate of the pedestal support and is held by the joint bridges. It fixes the cut riser to the upper edge. The upper clip also has an intake bridge (D), on which the facing profile is hung. To fix the facing profile we recommend glueing it at points using OTTOCOLL M500 hybrid adhesive. The facing profile can be shortened in length if necessary. Facing...

Due to the low weight of the system in comparison with traditional laying with gravel or bedding screed, PROSTILT can be used for a variety of projects. It is therefore possible to construct roof terraces on buildings, where this was not conceivable in the past. 1. Roof terraces have complex sealing systems, which run vertically in the wall area and form a basin. To avoid problems with moisture caused by damage, these areas in particular must be decoupled from the terrace covering. 2. PROSTILT pedestal supports maximise design options in (roof) terrace or patio construction....

PROSTILT on the roof terrace EXAMPLE OF RENOVATION AND APPLICATION OPTIONS Outdoor ceramic: GROHN TALK grey 60x120/2 FZ, www.grohn.de | planter trough: Luca Lifestyle ® www.lucalifestyle.com

PROSTILT with spacer Laying / processing The PROSTILT clip spacer with neoprene pad (A) can be used in the edge area of roof terraces, for example, for the transition between the patio and the masonry. This is placed on the upper side of the plate and held by the joint bridges. The spacer forms a consistent 10 mm thick joint to the wall or to the end of the roof terrace. This ensures that the seal of the roof terrace does not sustain any damage even if the surface extends or there is movement in the upper material. Open, even joints The integrated joint bridges of the pedestal supports...

1. In the areas where the patio connects to the house, it is particularly important to keep moisture away from the building. PROSTILT therefore includes a channel set that can be processed easily and makes a proactive contribution to protecting the property. 2. With PROSTILT pedestal supports patios can be erected without the expensive and time-consuming use of binding agents such as grout. The system can even be used on existing patios to build over old ones. 3. Bordered patios require a secure transition from the top covering to the kerb. PROSTILT ensures a neat finish in the edge area...

PROSTILT with concrete kerb BORDERED PATIOS WITH SPACERS

PROSTILT with channel set Laying / processing In the transition area between patios and living areas - anywhere where French doors or lifting/sliding doors are installed, drainage lines must be built in according to DIN18040-2 to prevent the penetration of water into the interior in the event of heavy rain or snowdrifts. The PROSTILT channel set (A) is installed directly or somewhat offset from the window depending on the structural circumstances.The channel set is placed on the half-plate of the adjustable foot and screwed into this. After this a suitable connection flagstone is laid on...