SERIES SALMA
1Pages

AWARDED COMPANY SPONSOR OFFICIAL SERIES SALMA TECHNICAL DATA AVAILABLE MODELS: FACTORY STOCKED PRODUCTS FOR FAST SHIPPING • 6 mm tempered glass. • +15 mm profile offset depending on the model. • Panel release system. Anti-roll over system. • Bearing height is adjustable by 4,5 mm. • Equipped with contact closure. • Sintra Handle as standard. • Reversible enclosure. Without lower guide. • Teknoclean treatment included. • 5 years guarantee. • Spare parts supply guaranteed: 10 years. SALMA series complies with European standard EN 14428 having passed all the tests provided for therein and detailed below. Characteristic to be tested Assessment method Compliance criteria Free from sharp corners, edges and burrs. (4.2) Impact resistance / shatter properties Thermally toughened safety glass. (4.3) Corrosion resistance 240 hours in salt spray. (4.4.2) Resistance to chemicals and stains Reagents: acids, alkalis, alcohols,bleaches, staining agents. (5.3) Not showing permanent staining or deterioration. (4.4.3) Not showing any cracks, crazing or discoloration after 50 cycles. (4.4.4) Not showing any functional deterioration. (4.4.5) Resists the impact without any functional deterioration. (4.4.6) Water retention Resists the impact without any functional deterioration. (4.4.6) QUALITY CERTIFICATES: EXAMPLE MODEL: Certificado de Aprobación Certificamos que el Sistema de Gestión de : Profiltek Spain, S.A. Ctra. Valencia-Castellón, N-340, km 938, 46510 Quartell, Valencia, España ha sido aprobado por LRQA de acuerdo con las siguientes normas: ISO 9001:2015 Gilles Bessiere - Area Technical Manager Emitido por: Lloyd’s Register Quality Assurance España, S.L.U. en nombre de: Lloyd's Register Quality Assurance Limited Fecha de Emisión Actual: 11 Enero 2019 Fecha de Caducidad: 31 Diciembre 2021 Número de Certificado: 10164703 Aprobaciones Originales: ISO 9001 – 27 Febrero 2001 Números de Aprobación: ISO 9001 – 0041433 El alcance de esta aprobación es aplicable a: Diseño, fabricación y comercialización de mamparas de baño y templado de vidrio. Comercialización de platos de ducha. Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Emitido por: Lloyd’s Register Quality Assurance España, S.L.U., ED,C/ Princesa, 29, 1º 28008 Madrid Spain en nombre de: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom UNE-EN 14428:2016 Bath enclosures UNE-EN 14428:2016 Bath enclosures YOUR CREATION, OUR PROJECT ISO 9001:2015 Quality Management System