Unisystem® Plus
9Pages

PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 049 8878411 +39 049 8878412 FAX. +39 049 706692 EMAIL: INFO@PROFILPAS.COM Profiles for wooden and laminate floors Unisystem® Plus Unisystem® Description UNISYSTEM® PLUS and UNISYSTEM® are two professional systems for floating wood and laminate floors, allowing them to expand as required. Both systems feature a natural aluminium base profile and covers performing a different function: • transition profiles for level floors; • profiles for floors at different heights, covering the difference in depths; end trims around wood or laminate floors; • perimeter profiles to provide a joint between the floor and the covering; • stair nosings. UNISYSTEM® PLUS, the next stage in the UNISYSTEM® system, featuring the addition of special teflon plugs which make it easier to fit the cover profile or remove it when repairing/maintaining the floor. Both systems are easy to lay, have minimum depth cover strips, are dimensionally stable, can be used for floors from 6.5 to 22.6mm (UNISYSTEM® PLUS) and from 6.5 to 15mm (UNISYSTEM®), and come in a variety of decorative finishes (5 anodised, 57 wood motifs). In both systems, the base profiles are either bolted or stuck (PP/96) to the concrete sub-floor. Anodized titanium aluminium models are not recommended for use in exterior environments. The Alcrom® Plus film which the profiles are coated in does not contain formaldehyde (UNI EN 717-2 1996:1996), easily supports humid environments (water absorption <1% UNI EN ISO 62:2008), withstands cold liquids (UNI EN 12720:2009), collision and abrasion AC3 (EN 13329/00). Materials Natural aluminium Al-Mg-Si aluminium, heat-treated in T6 (6060 T6). The profiles are made by extrusion. The outer surface must be protected from scratches and rubbing. They present a strong resistance to chemical and atmospheric agents. When wet, concrete and its derivatives produce alkaline substances which can corrode metal (forming aluminium hydroxide) when allowed to react with the surface. For this reason, the visible surface of the profile must be quickly and delicately cleaned to remove any concrete, adhesive or grouting substances and detergents. Anodized aluminium Al-Mg-Si aluminium, heat-treated in T6 (6060 T6). The profiles are made by extrusion then anodized with a ≥ 15 µm thick layer. The outer surface must be protected from scratches and rubbing. They present a strong resistance to chemical and atmospheric agents. When wet, concrete and its derivatives produce alkaline substances which can corrode metal (forming aluminium hydroxide) when allowed to react with the surface. For this reason, the visible surface of the profile must be quickly and delicately cleaned to remove any concrete, adhesive or grouting substances and detergents. Anodized surfaces can become ruined through wear and foot traffic (profiles used on floors) and the original finish lost as a result. Alcrom® Plus coated aluminium Al-Mg-Si aluminium, heat-treated in T6 (6060 T6). The profiles are extruded then coated with hard-wearing Alcrom® Plus film reproducing the different tones and/or finishes of wood. 06.06.22 | Profiles for wooden and laminate floors | Unisystem®

PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 049 8878411 +39 049 8878412 FAX. +39 049 706692 EMAIL: INFO@PROFILPAS.COM General note on metals Aluminium and stainless steel are not resistant to all chemical compounds. Consequently, contact with particularly aggressive products like hydrochloric acid (HCI) and phosphoric acid (H3P04) should be avoided. Products generally used to clean stone, ceramic and porcelain tiles, such as muriatic acid, ammonia and bleach, damage the surface finish on the metal and can cause intense corrosion. Moreover, any residues of...

PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 049 8878411 +39 049 8878412 FAX. +39 049 706692 EMAIL: INFO@PROFILPAS.COM The purpose of this document is to provide as many general indications as possible to guide you on when and how to clean the product, but they should also be verified on a case-by-case basis. It should be pointed out there are specific responsibilities in each part of the product's life cycle, starting from when it is installed the first time. Aluminium No special maintenance is required and aluminium products can be easily treated with...

PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 049 8878411 +39 049 8878412 FAX. +39 049 706692 EMAIL: INFO@PROFILPAS.COM 06.06.22 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem®

PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 049 8878411 +39 049 8878412 FAX. +39 049 706692 EMAIL: INFO@PROFILPAS.COM 06.06.22 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem®

PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 049 8878411 +39 049 8878412 FAX. +39 049 706692 EMAIL: INFO@PROFILPAS.COM 06.06.22 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem®

PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 049 8878411 +39 049 8878412 FAX. +39 049 706692 EMAIL: INFO@PROFILPAS.COM 06.06.22 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem®

PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 049 8878411 +39 049 8878412 FAX. +39 049 706692 EMAIL: INFO@PROFILPAS.COM 06.06.22 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem®

PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 049 8878411 +39 049 8878412 FAX. +39 049 706692 EMAIL: INFO@PROFILPAS.COM 06.06.22 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem®