Catalog excerpts
PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 049 8878411 +39 049 8878412 FAX. +39 049 706692 EMAIL: INFO@PROFILPAS.COM Internal corner profiles ® Description PROROUND B, available in stainless steel, anodized, painted, anti-bacterial aluminium and PVC, are floor-covering edge trims for use in environments where extreme hygiene is a priority. The PROROUND B range was designed specifically for use on existing surfaces laid with adhesive; it is the ideal solution for renovations and to meet hygiene-related regulations. The stainless steel version (model BI) is particularly resistant to attack from organic and non-organic agents, making it ideal for use in environments such as hospitals, food processing and chemical plants. BLAH is the ideal solution for renovation projects in locations such as hospitals, food processing and chemical plants in which bacteriological standards must be met. Special components are available to create joints with the following functions: external corners, internal corners, joints and edge trims, to create uniform, linear finishes. Materials Anodized aluminium Al-Mg-Si aluminium, heat-treated in T6 (6060 T6). The profiles are made by extrusion then anodized with a ≥ 15 µm thick layer. The outer surface must be protected from scratches and rubbing. They present a strong resistance to chemical and atmospheric agents. When wet, concrete and its derivatives produce alkaline substances which can corrode metal (forming aluminium hydroxide) when allowed to react with the surface. For this reason, the visible surface of the profile must be quickly and delicately cleaned to remove any concrete, adhesive or grouting substances and detergents. Anodized surfaces can become ruined through wear and foot traffic (profiles used on floors) and the original finish lost as a result. Anti-bacterial coated aluminium Al-Mg-Si aluminium, heat-treated in T6 (6060 T6). The profiles are extruded and then coated with special anti-bacterial technology. The surface reduces the most hazardous bacteria by up to 99%. This technology has been tested to the most stringent standards under international standard JID Z 2810:2000. They also present a relatively good resistance to chemical and atmospheric agents but not to mechanical stress which damages the surface coating. This means they are not recommended for floor use. Concrete, adhesive, grouting materials and detergents must be immediately removed from the visible surface of the profile. Stainless steel AISI 304 - DIN 1.4301 Especially resistant to the main chemical and atmospheric agents, to lime, mortar, tile adhesives and cleaning products. Also recommended for use in food industries, hospitals, external environments in general, etc. 08.02.19 | Profiles for internal corners | Cerfix® Proround B
Open the catalog to page 1PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 049 8878411 +39 049 8878412 FAX. +39 049 706692 EMAIL: INFO@PROFILPAS.COM PVC Co-extruded PVC Rigid/Plasticised Rigid PVC compound, lead-free, shock-proof, self-extinguishing. Stabilised, eco-compatible, based on Ca-Zn salts. Plasticised PVC compound, lead-free, self-extinguishing. Stabilised, eco-compatible, based on Ca-Zn salts. General note on metals Aluminium and stainless steel are not resistant to all chemical compounds. Consequently, contact with particularly aggressive products like hydrochloric acid (HCI) and...
Open the catalog to page 2PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 049 8878411 +39 049 8878412 FAX. +39 049 706692 EMAIL: INFO@PROFILPAS.COM During cleaning, the following aspects must be kept in mind at all times: • • • • • • • Do not use acid or alkaline detergents because they could damage the aluminium; Do not use products and/or abrasive materials; Do not use organic solvents on painted surfaces; Do not use detergents without first checking their chemical composition; Do not apply detergents straight onto the surface to be cleaned; Surfaces must be “cold” (max T°= 30°C) during...
Open the catalog to page 3PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 049 8878411 +39 049 8878412 FAX. +39 049 706692 EMAIL: INFO@PROFILPAS.COM 08.02.19 | Profiles for internal corners | Cerfix® Proround B
Open the catalog to page 4PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 049 8878411 +39 049 8878412 FAX. +39 049 706692 EMAIL: INFO@PROFILPAS.COM 08.02.19 | Profiles for internal corners | Cerfix® Proround B
Open the catalog to page 5PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 049 8878411 +39 049 8878412 FAX. +39 049 706692 EMAIL: INFO@PROFILPAS.COM 08.02.19 | Profiles for internal corners | Cerfix® Proround B
Open the catalog to page 6All PROFILPAS catalogs and technical brochures
-
Profilpas Catalogue 2024_01
292 Pages
-
Profilpas News 2024
20 Pages
-
Cerfix® Prodecor
4 Pages
-
Cerfix® Protop
3 Pages
-
Cerfix® Proangle
9 Pages
-
Metal Line 87/6 – 88/6
5 Pages
Archived catalogs
-
Unisystem® Plus
9 Pages
-
Glass Profile
20 Pages
-
Trend Color Stone
2 Pages
-
WPstop
2 Pages
-
Prolight
17 Pages
-
Stainless steel profiles
32 Pages
-
Metal Line
68 Pages
-
PVC skirting boards
3 Pages
-
Leaflet Skirting Boards 8600
3 Pages
-
Metal line 90/790
2 Pages
-
Catalogue Profilpas 2017
292 Pages