Datasheet ZEROTEC ZR PRODUCT DESCRIPTION ZEROTEC ZR allows the installer to perfectly match different floor levels when laying ceramic tile or wood flooring over an existing floor. Because of the slope, ZEROTEC profiles are ideal in passage areas for hand trolley and cars, while providing edge protection resistant to vertical loads. The brass version is recommended for industrial applications in garages and shopping centers. Available in aluminum and brass with patented vertical dovetail anchoring. TECHNICAL FEATURES Length: 2,70 meters Stainless Steel

positive profile MATERIAL DESCRIPTIONStainless Steel Steel profiles are made by cold forming sheets of constant thickness, thus differing from the corresponding aluminum and brass versions made by hot extrusion, while maintaining their application and dimensional characteristics. Stainless steel effectively resists high mechanical stress and is particularly suitable for use in the chemical, food, and hospital sectors, where hygiene, durability, and chemical resistance are essential. Normally produced with a semi-gloss finish, a brushed finish can also be achieved by partially removing material...

® SELFLINE/KIT PRE-CUT CURVELINE/BENDABLE zerotec >> ZR in Polished Brass e-mail: [email protected]

APPLICATION 1. Choose the H-size profile corresponding to the thickness of the tile to be laid, taking care to ensure that the profile does not exceed the edge of the floor but is positioned 0.5 to 1 mm lower. 2. Spread the adhesive in the profile application area with the help of a notched trowel; 3. Cut the profile to the required length and place it so that the base sinks into the adhesive, pressing and aligning it; 4. Apply an additional layer of adhesive to the perforation and in the cavities of the vertical section of the profile in contact with the edge of the floor; 5. Generally leave...

BILL OF QUANTITIES ITEM Supply and installation of profile in __________________________ (material), with _________________________________ ______________ finish (refer to the Material Description section) in the characteristic size __________________ mm, equipped with a punched flange that guarantees a perfect grip with the adhesive used. Profile with dovetail inner part for better adhesive grip. Family type _________________________ from the Profilitec company as a transition and protection profile for the wall covering to be supplied and installed properly, following the methods and fields...