Datasheet WOODTEC LT PRODUCT DESCRIPTION The WOODTEC LT profiles are specifically designed for finishing the perimeter of floating wood floors, particularly when they transition to another floor type at the same elevation or abut a vertical surface. While acting as an expansion joint, they also allow floor edge finishing without baseboards. This profile is also suitable along sliding door tracks and as entrance mat framing. Installed with flathead screws. TECHNICAL FEATURES Length: 2,70 meters Stainless Steel - Brass MATERIAL DESCRIPTION Stainless Steel Steel profiles are made by cold forming sheets of constant thickness, thus differing from the corresponding aluminum and brass versions made by hot extrusion, while maintaining their application and dimensional characteristics. Stainless steel effectively resists high mechanical stress and is particularly suitable for use in the chemical, food, and hospital sectors, where hygiene, durability, and chemical resistance are essential. Normally produced with a semi-gloss finish, a brushed finish can also be achieved by partially removing material using rotating nylon and quartz fiber brushes. This process gives the surface a matte appearance without altering its characteristics. AISI 304 STAINLESS STEEL - EN X 5 CrNi 18 10 - DIN 1.4301: This steel belongs to the AUSTENITIC category and is the most widespread and commonly used alloy for products requiring high technical and performance characteristics. It is highly resistant to most chemical agents but may stain or darken superficially; a standard polishing product is sufficient to restore its original appearance.

positive profile woodtec >> LT in Stainless Steel AISI 304 - DIN 1.4301 Polished The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. ANODIZED ALUMINUM: The anodic oxidation process provides protection against corrosion caused by atmospheric agents, without involving galvanic treatments. According to the EN 12373 standard, the profiles are treated with preventive processes that make them uniformly opaque, subsequently they are coloured through...

positive profile MATERIAL DESCRIPTIONBrass Profiles made from CW618N (EN 12167) brass alloy are characterized by high resistance to mechanical stress, making them particularly suitable for heavy-traffic applications, such as industrial settings and at expansion joints. Brass is resistant to most chemical agents commonly encountered during the installation of ceramic coverings. However, in the presence of humidity or aggressive substances, the surface may develop superficial oxidation, which can be removed using a standard polishing product. These profiles can be manufactured through either hot...

Profiles applied with screws and plugs APPLICATION 1. Cut the profile to the required length; 2. Position the profile and mark the position of the holes, possibly using the holes present in the profile if in the perforated version; 3. Insert the dowels if the support requires it, fix the profile using countersunk screws (for threshold cover profiles use 3 mm diameter screws and 5 x 25 mm dowels). N.B.: Aluminum profiles offer limited resistance to alkaline substances, so their use must be evaluated according to the expected chemical aggressions. Aluminum profiles in contact with cementitious...

BILL OF QUANTITIES ITEM Supply and installation of profile in __________________________ (material), with finish ____________________________ _________________ (see Material Description section) of characteristic size __________________ mm. Profile with shaped upper part for an ideal finish of the wooden floor. Family type _________________________ from the Profilitec company as a perimeter or terminal profile and perimeter expansion joint to be supplied and installed according to the rules of the art, respecting the methods and fields of application indicated by the manufacturer. Profile length:...