profilit.ec positive profile Synthetic resin corner protection profile, through-coloured to hide the effects of wear and damage. The smooth surface makes it easy to clean and more hygienic than traditional baseboards. Available in colours and a range of dual-coloured options. Together with an aesthetic value the dualcolour effect with a darker colour in the central part improves its resistance to trolleys and stretchers passage. These corner protection profiles can be perfectly co-ordinated with the other profiles in the wallprotection range - wall protection strips (WP) and baseboard (WB). RESINIL Thermoplastic synthetic resin for COEXTRUSION: Made from primary resin whose composition based on Polyvinyl Chloride characterizes it for high resistance and optimized compatibility with regards to long-lasting adhesion with plasticized resins used in the coextrusion process, i.e. the permanent union of two materials with different degrees of Shore hardness. RESINFLEX Plasticized thermoplastic synthetic resin: Made from primary resin, its polyvinyl chloride composition provides high resistance and compatibility with Resinil in the COEXTRUSION process we use in most expansion joints. Thanks to the nature of the plasticizers used, the material maintains its essential elasticity characteristics over time. waMprotection >> WA synthetic resin full body bicolor Resinil + Resinflex

APPLICATION 1. Check that the substrate is solid, flat, clean, degreased and dry, verifying that the application temperature is not lower than 15°C in case of gluing; 2. Cut the profile to the required length; 3. Apply the adhesive (FIXXTEC) to the part of the profile to be adhesived, or remove the protective paper from the adhesive for self-adhesive versions, and position the profile correctly without further adjustments; 4. Apply the profile with uniform pressure without hammering; 5. Remove any adhesive residue from the profile immediately. CLEANING AND MAINTENANCE SYNTHETIC RESIN: Thermoplastic...