Catalogs >
PROFILITEC >
Walktec SWH

Walktec SWH
1Pages

Catalog excerpts

Safety along with long lasting performance Carborundum quality always stands out in accident prevention measures. WALKTEC is a simply, ready to apply step safe adhesive strip which sticks to any surface. We recommend the double strip application per step in order to ensure a more effective safety action. Before the application of the strips, cut round the tips (see photo) and use a primer where necessary to ensure a better adhesion to the support. The safety strip should be used only on mirror-like surfaces. Anti-slip performances, according to DIN 51130 (06/2004) standard. IINSTALLATION AND MAINTENANCE: 1) Thorougly wipe off any residue, grease or dirt from the surface and apply primer if so necessary. 2) Round off the strip ends. 3) Remove the protective paper liner and apply the strip uniformly by press-roll. 4) Do not apply strips with temperatures below 15°C unless you have preheated the strips themselves and the support. 5) Regularly brush off impurities from strips so to maintain best grip texture. 6) For installation on smooth tiles, create small strips with rounded ends and apply them in each tile. 7) Seal the strips along the edges in order to avoid water infiltration under the strips with their consequent detachment. WALKTEC SWH Carborundum Self-adhesive Strip The carborundum strips are made up of a highly compact plastic tape with aggregate granular abrasive polymer for long lasting performance. The adhesive bottom is protected by a paper liner. WALKTEC is tested for abt.1,3 million walk over pedestrian transit. With high passage its resistance and performances can be sensibly reduced over the time. The product is supplied in rolls 18,3 m long ( except SWHS which is sold in 0,61 long strips). mm x m Material: Carborundum Widths: 19, 25, 50 mm Fluoresc. Black Black Transp. White Black Black anti-slip self-adhesive stair nosing

Open the catalog to page 1