SUPAR/SUPAR120 stackable extension ring system description Uptec is a patented system composed of only 3 basic elements, designed to create raised outdoor floors. These are height-adjustable polypropylene supports, with tilting head to compensate slope difference up to 5%. By simply blocking the locking ring on the head, you can switch from the self-leveling system to the fixed one. The accessory applied above is made of rubber to ensure an anti-noise and anti-slip system. UPTEC - SUPAR PRODUCT DESCRIPTION 432/5000 Uptec SUPAR is a stackable ring used in combination with the standard support, SUPAS 58mm (2-9/32”). It allows an increase in the overall height of 30 mm (1-3/16”) for each mounted ring. SUPAR has been designed to be easily assembled, thanks to the symbols placed both on the ring and on the base of the support. It can be used individually or with the assembly of several elements until the desired height is reached. SUPAR assembly on base: symbology placed on the bottom of the SUPAR and on the base. Open SUPAR assembly on SUPAR: symbology placed underneath the added SUPAR and on the top of the underlaying SUPAR elements. technical drawings - configuration example SUPAS + 1SUPAR INSTALLATION EXAMPLE - Configuration SUPAS + 1SUPAR

UPTEC - SUPAR120 PRODUCT DESCRIPTION Profilitec expands the Uptec family with the introduction of the SUPAR120 stackable ring, which increases the height by 120 mm - 4-3/4” on raised floors installation. It is designed to be easily assembled to the SUPAS support thanks to the symbols on both the ring and the base. SUPAR120 is a new solution designed for those very high installations that require a stable and robust extension and it can be used individually or with the SUPAR ring to achieve the desired height. The time factor at the job site is essential, which is why we have come up with an ideal...

Tests performed by the University of Trento. iNTERCHANGEABLE TABS SUPA . - ceramic installation 'i - tabs for 2mm - 5/64" joint SUPA 4 - ceramic installation - aluminum joist The 3in1 adjustment key has been designed to facilitate height adjustment and fixing of the supports, as well as to facilitate the removal of the tabs. Profilitec S.p.A. Profilitec Corp. positive profile Via Scotte, 3 - 36033 Isola Vicentina (Vicenza), ITALY 472 Meeting Street, Suite C, No. 301 e-mail: [email protected]