Catalogs >
PROFILITEC >
Striptec ST

Striptec ST
1Pages

Catalog excerpts

STRIPTEC profile is generally fixed to link two adjacent floors of similar or different height and covering materials. The rounded shape of this strip profile grants to maximum height difference of 5 mm. To apply STRIPTEC means also to cover up the slight imperfections which may occur during the laying job. It can also be used as a terminal profile provided that the thickness of the surface material does not exceed 5 mm. Drilled Illustrated scale dimension 1:1 Installation for self-adhesive version: 1) Check if support is sound, smooth, clean, dry and free from grease and loose materials. 2) Cut profile to the required length and remove the protective film. 3) Press downwards on the profile until it is fixed firmly. Do not hammer. Installation for pre-drilled version: 1) Cut profile to the required length and place the mark on the surface of the profile pre-drilled holes. 2) Insert and fix the flare head screws. STRIPTEC ST-OL* Brass polished A laminate polished brass flat bar which is resistant to light mechanical and chemical impacts and lasting wear. The brass article allows an extremely elegant decorative finish to homes and is available in pre-drilled or self adhesive versions. Available also in the heavy duty version, thickness 1,3 mm, Code STP 30 OLA/ OLF. STRIPTEC ST-IL* Polished Stainless Steel Stainless steel profile with a high resistance to wear and a good resistance to atmospheric agents. Available in self-adhesive (OLA), drilled (OLF), pre-drilled (OLN) versions. B=mm Material: Laminated Brass Finish: Polished (OL*) Material: Stainless Steel Finish: Polished (IL*) Length: 2,70 metres : 0,90 / 1,35 metres Width: 18, 30, 35 mm STRIPTEC ST-A* Anodised Aluminium Full aluminium anodised profile available in Silver (AS), Gold (AO), Bronze (AB) finishes. This product confers to chromatic combination with indoor decoration with all floor covering materials. Material: Extruded anodised aluminium Finish*: Silver (AS*), Gold (AO*), Bronze (AB*) Length: 2,70 metres : 0,90 / 1,35 metres Width: 18, 30, 35, 40 mm STRIPTEC ST 30* Aluminium Wood Cladding Finish Profile with to melamine wood tone in 8 different varieties. Good tolerance to abrasion comparable to most melamine coverings. The melamine embossing on the aluminium is particularly smooth therefore it remains quite clean and blends well with the flooring tone. Finish Material: Extruded Aluminium Laminate cov. Length: 2,70 metres Width: 30 mm Whitened Maple Beech Oak Cherry Light walnut Dark walnut Wengé : Pre-cut length available in SELFLINE kit L= 0,90/1,35 m junction on existing floors

Open the catalog to page 1