profilit.ec positive profile STRIPTEC ST profiles are designed to join adjoining floors of equal or different type and thickness. The rounded shape of this profile covers edge imperfections and allows a slight rotation, compensating for elevation differences of up to 5mm. It can also be used as a termination profile, given a floor thickness of up to 5mm. Available in two versions: selfadhesive and screw-on. The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. ANODIZED ALUMINUM: The anodic oxidation process provides protection against corrosion caused by atmospheric agents, without involving galvanic treatments. In accordance with the EN 12373 standard, profiles undergo preliminary treatments that create a uniformly matte surface. They are then colored through an electrochemical oxidation process in standard finishes: Silver, Gold, Bronze, Copper, and Titanium, with a coating thickness of up to 20 microns. striptec >> ST38 in Anodized Aluminum - Self-Adhesive striptec >> ST38 in Anodized Aluminum - Drilled

Self-adhesive profiles APPLICATION 1. Check that the substrate is solid, flat, clean, degreased and dry, verifying that the application temperature is not lower than 15°C; 2. Cut the profile to the required length, remove the protective paper from the sticker and position the profile correctly without further adjustments; 3. Apply the profile with uniform pressure without hammering. Profiles applied with screws and plugs APPLICATION 1. Cut the profile to the required length; 2. Align the profile and mark the position of the holes using the holes in the profile; 3. Insert the plugs and screw them...

BILL OF QUANTITIES ITEM Supply and installation of profile in __________________________ (material), with finish ____________________________ ___________________ (see Material Description section) of characteristic size __________________ mm. Profile with connected upper part for an ideal floor finish. Family type _________________________ from the Profilitec company as a finishing profile and threshold cover connection between floors to be supplied and installed properly, following the methods and fields of application suggested by the manufacturer. Profile length: 2700 mm Profile SKU: ___________________________...