profilit.ec positive profile STAIRTEC SC stair nosing profile is designed for thin, resilient flooring. Simply lay the flooring on the step riser, install the profile covering the riser edge and then apply the tread flooring flush in the indented lip of the profile. STAIRTEC SC profile protects the tread edge and hides riser imperfections. The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. ANODIZED ALUMINUM: The anodic oxidation process provides protection against corrosion caused by atmospheric agents, without involving galvanic treatments. According to the EN 12373 standard, the profiles are treated with preventive processes that make them uniformly opaque, subsequently they are coloured through an electro-chemical oxidation process in the standard colours Silver, Gold, Bronze, Copper and Titanium with a thickness of up to 10 microns. stairtec >> SC in Anodized Aluminum

APPLICATION 1. Cut the profile to the required length; 2. Position the profile and mark the position of the holes, possibly using the holes present in the profile if in the perforated version; 3. Insert the dowels if the support requires it, fix the profile using countersunk screws (for threshold cover profiles use 3 mm diameter screws and 5 x 25 mm dowels). N.B.: Aluminum profiles offer limited resistance to alkaline substances, so their use must be evaluated according to the expected chemical aggressions. Aluminum profiles in contact with cementitious substances can be attacked by corrosion...