profilit.ec positive profile PRODUCT DESCRIPTION The STAIRTEC series offers effective, practical and long-lasting technical solutions for stairs finishing, especially in public environments, in line with the most recent safety standards. Products supplied with a non-slip insert already fitted. MATERIAL DESCRIPTIONAluminum The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. ANODIZED ALUMINUM: The anodic oxidation process provides protection against corrosion caused by atmospheric agents, without involving galvanic treatments. According to the EN 12373 standard, the profiles are treated with preventive processes that make them uniformly opaque, subsequently they are coloured through an electro-chemical oxidation process in the standard colours Silver, Gold, Bronze, Copper and Titanium with a thickness of up to 10 microns. RESINFLEX Plasticized thermoplastic synthetic resin: Made from primary resin, its polyvinyl chloride composition provides high resistance and compatibility with Resinil in the COEXTRUSION process we use in most expansion joints. Thanks to the nature of the plasticizers used, the material maintains its essential elasticity characteristics over time.

positive profile SETD = Right / SETS = Left stairtec >> FSA Riser cover in Anodized Aluminum for FSL-A* stairtec >> FSLI Rubber Insert Spare part for FSL-A* stairtec >> FSLT End cap in PVC for FSL-A* 1. Choose the H-size profile corresponding to the thickness of the tile to be laid, taking care to ensure that the profile does not exceed the edge of the floor but is positioned 0.5 to 1 mm lower. 2. Spread the adhesive in the profile application area with the help of a notched trowel; 3. Cut the profile to the required length and place it so that the base sinks into the adhesive, pressing and aligning...

CLEANING AND MAINTENANCE ALUMINIUM: Aluminum requires no special maintenance. For cleaning, use colorless alcohol diluted in water or neutral detergents, avoiding acidic ones (e.g., hydrochloric or hydrofluoric acid); use non-abrasive sponges or cloths to avoid damage. We recommend not applying cleaners directly to surfaces. After cleaning, rinse with water and dry immediately with a soft cloth. Avoid polishes. Quickly remove residual cement or grout to protect the surface. WARNINGS These profiles should be handled with care, using cut-resistant gloves. The indications and prescriptions herein,...