Datasheet STAIRTEC FS PRODUCT DESCRIPTION The patented “Clip System” used in the STAIRTEC FS series which incorporates a modular aluminum base section and replaceable non-slip thermoplastic rubber insert optimizes the challenges of typical transitions from tile flooring to tile stairs. This product range has been designed to match stairs to its connecting floor. TECHNICAL FEATURES Length: 2,70 meters FS30A + TR - Aluminum SETD = Right / SETS = Left A23= AN + P23 A32= AN + P32 A51= AN + P51 MATERIAL DESCRIPTION Aluminum The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes.

1. Choose the H-size profile corresponding to the thickness of the tile to be laid, taking care to ensure that the profile does not exceed the edge of the floor but is positioned 0.5 to 1 mm lower. 2. Spread the adhesive in the profile application area with the help of a notched trowel; 3. Cut the profile to the required length and place it so that the base sinks into the adhesive, pressing and aligning it; 4. Apply an additional layer of adhesive to the perforation and in the cavities of the vertical section of the profile in contact with the edge of the floor; 5. Generally leave a space of...

BILL OF QUANTITIES ITEM Supply and installation of profile in __________________________ (material), with _________________________________ ______________ finish (refer to the Material Description section) in the characteristic size __________________ mm, equipped with a punched flange that guarantees a perfect grip with the adhesive used. Profile with dovetail inner part for better adhesive grip. Family type _________________________ of the Profilitec company as a step nosing profile for protecting the covering to be supplied and installed properly, following the methods and fields of application...