Catalogs >
PROFILITEC >
Stairtec FS

Stairtec FS
1Pages

Catalog excerpts

STAIRTEC FS is a patented product with the “Clip System” . Ceramic tile laying jobs may sometimes be quite delicate with problems which differ from standard applications such as linear wall tiling. Stairs, for instance, to be covered with the same tiles as the floor may require non standard spacing to match different heights from step to connecting floor for example. The STAIRTEC product range is conceived to face these adjustment problems by featuring valid and lasting technical solutions. TR Illustrated scale dimension 1:1 The product FS is certified R10. Anti-slip properties. According to standard DIN 51130 (06/2004). STAIRTEC FS 30 A* Aluminium+ Synthetic insert “Clip System” patented. The system combines an aluminium base section- equipped with an anti-slip insert- with a profile TRIMTEC chosen with the desired height-which works as a fixing flange. The system works even with the off-cuts of TR seriess with a consequent economical advantage. To choose the correct height of trim to be used, subtract 2 mm from the tile thickness you need to match with. Example: for 10 mm tiles, insert TRIMTEC H = 8 mm into the basic module STAIRTEC FS, as STAIRTEC FS will increase the overall height of the assembled section by 2 mm. The required 10 mm thickness is then achieved. The synthetic resin insert can be replaced in case of damage or wear and tear. CHARACTERISTICS Base profile in aluminium, with an anti-slip synthetic insert strip for pre inserted in base. TRIMTEC flange profile is not included as it is to be ordered separately based upon the desired height to match the tile (Tile H reduced by 2 mm). Available endplugs FST height 8/ 10/ 12,5 mm. stair nosing tiled steps B=mm Material: Extruded Natural aluminium Insert colours Synthetic Insert Length: 2,70 metres Width: 30 mm Colours*: Grey (23), Beige (32), Black (51) Material: PVC Colours*: Grey (23), Beige (32), Black (51)

Open the catalog to page 1