Datasheet STAIRTEC FI PRODUCT DESCRIPTION STAIRTEC FI is a technical profile designed for tile steps. Made of stainless steel, it is a low-cost option that is highly resistant to point loading, impact and chemicals. Equipped with no-slip carborundum strips, STAIRTEC FI profiles are particularly suited for high traffic, public and commercial applications. TECHNICAL FEATURES Length: 2,70 meters MATERIAL DESCRIPTION Stainless Steel Steel profiles are made by cold forming sheets of constant thickness, thus differing from the corresponding aluminum and brass versions made by hot extrusion, while maintaining their application and dimensional characteristics. Stainless steel effectively resists high mechanical stress and is particularly suitable for use in the chemical, food, and hospital sectors, where hygiene, durability, and chemical resistance are essential. Normally produced with a semi-gloss finish, a brushed finish can also be achieved by partially removing material using rotating nylon and quartz fiber brushes. This process gives the surface a matte appearance without altering its characteristics. AISI 304 STAINLESS STEEL - EN X 5 CrNi 18 10 - DIN 1.4301: This steel belongs to the AUSTENITIC category and is the most widespread and commonly used alloy for products requiring high technical and performance characteristics. It is highly resistant to most chemical agents but may stain or darken superficially; a standard polishing product is sufficient to restore its original appearance.

walktec >> SWH Carborundum self-adhesive “Strip Walk" 1. Choose the H-size profile corresponding to the thickness of the tile to be laid, taking care to ensure that the profile does not exceed the edge of the floor but is positioned 0.5 to 1 mm lower. 2. Spread the adhesive in the profile application area with the help of a notched trowel; 3. Cut the profile to the required length and place it so that the base sinks into the adhesive, pressing and aligning it; 4. Apply an additional layer of adhesive to the perforation and in the cavities of the vertical section of the profile in contact with...

BILL OF QUANTITIES ITEM Supply and installation of a profile in __________________________ (material), with a ______________________________ _________________ finish (see Material Description section) of characteristic size __________________ mm, equipped with a perforated fin that guarantees perfect grip with the adhesive used. Profile suitable for the application of a carborundum non-slip insert. Family type _________________________ of the Profilitec company as a step nosing profile for protecting the covering to be supplied and installed properly, following the methods and fields of application...