Datasheet SQUAREJOLLY SJQ PRODUCT DESCRIPTION The patented SQUAREJOLLY SJQ aluminum decorative profile is designed for ceramic tile wall coverings. The unique squared section perfectly aligns with modern rectified tile edges and defines horizontal and vertical geometrical patterns on surface decorations. Two dovetailed cavities within the profile guarantee strong mechanical anchoring, allowing installation before or after the laying process. TECHNICAL FEATURES Length: 2,70 meters MATERIAL DESCRIPTION Aluminum The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. ANODIZED ALUMINUM: The anodic oxidation process provides protection against corrosion caused by atmospheric agents, without involving galvanic treatments. According to the EN 12373 standard, the profiles are treated with preventive processes that make them uniformly opaque, subsequently they are coloured through an electro-chemical oxidation process in the standard colours Silver, Gold, Bronze, Copper and Titanium with a thickness of up to 10 microns. BRIGHT POLISHED ALUMINUM: The brightening process consists of a mechanical-chemical polishing treatment and the subsequent anodic bath in Gold, Chrome, Copper and Titanium colors. The resulting profiles retain the same corrosion resistance as standard anodized profiles.

squarecapsule >> SJC in Bright Polished Anodized Aluminum APPLICATION 1. Choose the H-size profile corresponding to the thickness of the tile to be laid, taking care to ensure that the profile does not exceed the edge of the floor but is positioned 0.5 to 1 mm lower. 2. Spread the adhesive in the profile application area with the help of a notched trowel; 3. Cut the profile to the required length and place it so that the base sinks into the adhesive, pressing and aligning it; 4. Apply an additional layer of adhesive to the perforation and in the cavities of the vertical section of the profile...

WARNINGS These profiles must be handled with care, taking care to use cut-resistant gloves. The instructions and requirements contained herein, while based on our experience, are to be considered purely indicative and must be confirmed by exhaustive practical applications. Profilitec declines all responsibility for any damage to persons or property resulting from improper use of the product. The user is responsible for determining whether or not the product is suitable for use and assumes all responsibility for any damage resulting from incorrect installation of the material. BILL OF QUANTITIES...