Datasheet SANITEC SB PRODUCT DESCRIPTION SANITEC SB-IL stainless steel cove-shaped profiles are easy to clean and designed to comply with hygiene standards for public spaces subjected to sanitary inspection such as hospitals, food processing plants and public bathrooms. This transition profile is installed on site; the wall and floor coverings are then laid flush onto the lip on the profile. TECHNICAL FEATURES Length: 2,70 meters

positive profile MATERIAL DESCRIPTIONStainless Steel Steel profiles are made by cold forming sheets of constant thickness, thus differing from the corresponding aluminum and brass versions made by hot extrusion, while maintaining their application and dimensional characteristics. Stainless steel effectively resists high mechanical stress and is particularly suitable for use in the chemical, food, and hospital sectors, where hygiene, durability, and chemical resistance are essential. Normally produced with a semi-gloss finish, a brushed finish can also be achieved by partially removing material...

APPLICATION 1. Choose a profile according to tile thickness and desired finish; 2. Cut to the desired length; 3. Spread the adhesive in the profile application area with the help of a notched trowel; 4. Position the profile by pressing it so that it is embedded in it, and then spread the resulting excess adhesive on the surface of the flap; 5. Lay the tiles, taking care to align them with the profile and leave a gap of about 2 mm. The profile laid properly should be installed in the same plane as the tile; 6. To apply special pieces such as external and internal corners, joints, and end caps,...