profilit.ec positive profile SANITEC SB 12 profiles resolve wall-to-wall or wall-to-floor transitions. The cove-shaped profile is easy to clean and offers a hygienic solution to internal corners in kitchen countertops, shower stalls and bathtubs, replacing silicone caulking that inevitably yellows and absorbs dirt over time. MATERIAL DESCRIPTIONAluminum The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. ANODIZED ALUMINUM: The anodic oxidation process provides protection against corrosion caused by atmospheric agents, without involving galvanic treatments. According to the EN 12373 standard, the profiles are treated with preventive processes that make them uniformly opaque, subsequently they are coloured through an electro-chemical oxidation process in the standard colours Silver, Gold, Bronze, Copper and Titanium with a thickness of up to 10 microns. sanitec >> SB 12 in Anodized Aluminum sanitec >> SB 12 in Bright Polished Anodized Aluminum

APPLICATION 1. Choose the desired material and finish profile; 2. Cut to the desired length; 3. Thoroughly clean the surfaces that will be covered by the profile after installation; 4. Fill the joint space with FIXXTEC or with the adhesive used for laying the floor; 5. Sink the profile into the adhesive, making sure that both lateral overlaps of the profile rest on the coverings to be joined; 6. Apply and maintain uniform pressure for a few minutes along the entire profile to optimize adhesion to the installation surface. N.B.: Aluminum profiles offer limited resistance to alkaline substances,...