profilit.ec positive profile SANITEC IC60 is a range of resin baseboards created for hygienic connections between floor and wall covering or between two walls, particularly in the healthcare, chemical and food fields. Designed for application on existing surfaces, they can be used for renovations and retrofitting of previously built public buildings, because they meet current regulations. Shaped outer edges ensure perfect adhesion of the profile to the substrate. RESINTOP Rigid thermoplastic synthetic resin: This material is specifically formulated to optimize the performance of rigid profiles intended for permanent indoor and outdoor applications, where both aesthetic and durability requirements must be met. Produced from primary resin with a Polyvinyl Chloride (PVC)-based composition, it is suitable for a wide range of uses at temperatures up to +60°C. The selected raw material ensures excellent resistance to UV rays, limited mechanical impacts, and strong protection against the stagnation of fungi and bacteria.

APPLICATION 1. Check that the substrate is solid, flat, clean, degreased and dry, verifying that the application temperature is not lower than 15°C in case of gluing; 2. Cut the profile to the required length; 3. Apply the adhesive (FIXXTEC) to the part of the profile to be adhesived, or remove the protective paper from the adhesive for self-adhesive versions, and position the profile correctly without further adjustments; 4. Apply the profile with uniform pressure without hammering; 5. Remove any adhesive residue from the profile immediately. CLEANING AND MAINTENANCE SYNTHETIC RESIN: Thermoplastic...