Datasheet ROUNDJOLLY RJ PRODUCT DESCRIPTION The ROUNDJOLLY profiles connect floors of different levels, completing and protecting the tile edge from bangs and mechanical impacts. The profile, available in aluminium and stainless steel, is ideal for restructuring and on surfaces covered with thin tiles. TECHNICAL FEATURES Length: 2,70 meters Synthetic Resin

positive profile MATERIAL DESCRIPTIONStainless Steel Steel profiles are made by cold forming sheets of constant thickness, thus differing from the corresponding aluminum and brass versions made by hot extrusion, while maintaining their application and dimensional characteristics. Stainless steel effectively resists high mechanical stress and is particularly suitable for use in the chemical, food, and hospital sectors, where hygiene, durability, and chemical resistance are essential. Normally produced with a semi-gloss finish, a brushed finish can also be achieved by partially removing material...

roundcapsule >> RJC End caps in Stainless Steel AISI 304 - DIN 1.4301 Brushed roundjolly >> RJ in Stainless Steel AISI 304 - DIN 1.4301 Sanded roundcapsule >> RJC External End caps in Stainless Steel AISI 304 - DIN 1.4301 Sanded

MATERIAL DESCRIPTION Aluminum The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. ANODIZED ALUMINUM: The anodic oxidation process provides protection against corrosion caused by atmospheric agents, without involving galvanic treatments. In accordance with the EN 12373 standard, profiles undergo preliminary treatments that create a uniformly matte surface. They are then colored through an electrochemical oxidation process in standard finishes:...

roundcapsule >> RJI Capsule in Anodized Aluminum roundcapsule >> RJC Capsule in Brushed Anodized Aluminum roundcapsule >> RJI Capsule in Brushed Anodized Aluminum Via Scotte, 3 - 36033 Isola Vicentina (Vicenza), ITALY e-mail: [email protected] Profilitec Corp. Profilitec France e-mail: [email protected] e-mail: [email protected] e-mail: [email protected]

roundcapsule >> RJI Capsule in Brushed Polished Anodized Aluminum roundjolly >> RJ in Bright Polished Anodized Aluminum roundcapsule >> RJC External cap in Bright Polished Anodized Aluminum roundcapsule >> RJI Capsule in Bright Polished Anodized Aluminum Via Scotte, 3 - 36033 Isola Vicentina (Vicenza), ITALY e-mail: [email protected] Profilitec Corp. Profilitec France e-mail: [email protected] e-mail: [email protected] e-mail: [email protected]

positive profile Via Scotte, 3 - 36033 Isola Vicentina (Vicenza), ITALY e-mail: [email protected] Profilitec Corp. Profilitec France e-mail: [email protected] e-mail: [email protected] e-mail: [email protected] roundcapsule >> RJC External cap in Powder Coated Aluminum

Via Scotte, 3 - 36033 Isola Vicentina (Vicenza), ITALY e-mail: [email protected] Profilitec Corp. Profilitec France e-mail: [email protected] e-mail: [email protected] e-mail: [email protected]

roundcapsule >> RJI Capsule in Powder Coated Aluminum Modern Line Via Scotte, 3 - 36033 Isola Vicentina (Vicenza), ITALY e-mail: [email protected] Profilitec Corp. Profilitec France e-mail: [email protected] e-mail: [email protected] e-mail: [email protected]

positive profile MATERIAL DESCRIPTIONBrass Profiles made from CW618N (EN 12167) brass alloy are characterized by high resistance to mechanical stress, making them particularly suitable for heavy-traffic applications, such as industrial settings and at expansion joints. Brass is resistant to most chemical agents commonly encountered during the installation of ceramic coverings. However, in the presence of humidity or aggressive substances, the surface may develop superficial oxidation, which can be removed using a standard polishing product. These profiles can be manufactured through either hot...

positive profile MATERIAL DESCRIPTIONSynthetic resin RESINTOP Rigid thermoplastic synthetic resin: This material is specifically formulated to optimize the performance of rigid profiles intended for permanent indoor and outdoor applications, where both aesthetic and durability requirements must be met. Produced from primary resin with a Polyvinyl Chloride (PVC)-based composition, it is suitable for a wide range of uses at temperatures up to +60°C. The selected raw material ensures excellent resistance to UV rays, limited mechanical impacts, and strong protection against the stagnation of fungi...

Via Scotte, 3 - 36033 Isola Vicentina (Vicenza), ITALY e-mail: [email protected] Profilitec Corp. Profilitec France e-mail: [email protected] e-mail: [email protected] e-mail: [email protected]

APPLICATION 1. Choose the H-size profile corresponding to the thickness of the tile to be laid, taking care to ensure that the profile does not exceed the edge of the floor but is positioned 0.5 to 1 mm lower. 2. Spread the adhesive in the profile application area with the help of a notched trowel; 3. Cut the profile to the required length and place it so that the base sinks into the adhesive, pressing and aligning it; 4. Apply an additional layer of adhesive to the perforation and in the cavities of the vertical section of the profile in contact with the edge of the floor; 5. Generally leave...

WARNINGS These profiles should be handled with care, using cut-resistant gloves. The indications and prescriptions herein, while corresponding to our experience, are to be considered purely indicative and must be confirmed by exhaustive practical applications. Profilitec declines any responsibility for any damage to people or things resulting from improper use of the products. The user is required to determine whether or not the product is suitable for use and assumes all responsibility arising from incorrect installation of the material. BILL OF QUANTITIES ITEM Supply and installation of profile...