Datasheet BASEBOARD BFW PRODUCT DESCRIPTION PLANO BFW is a profile conceived to make wall base of the same material used for the floor (ceramic or wood) and create a flush installation with the gypsum wall board. The back profile remains invisible and works as bis support enabling the skirting element (ceramic or wood) to be adhered. This skirting product is designed to coordinate with the most popular varieties of gypsum wall board. TECHNICAL FEATURES Length: 2,70 meters MATERIAL DESCRIPTION Aluminum The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes.

piano >> BFWE External corner in Plastic for BFW piano >> BFWG Junction in Plastic for BFW 1. Check that the substrate is solid, flat, clean, degreased and dry, verifying that the application temperature is not lower than 15°C in case of gluing; 2. Cut the profile to the required length; 3. Secure the profile or its profile support base using wall plugs and countersunk screws. Alternatively, if the wall substrate allows, use FIXXTEC to secure the back of the base or profile; 4. Apply the profile with uniform pressure without hammering; 5. Subsequently, at the end of the work, apply the front...

BILL OF QUANTITIES ITEM Supply and installation of profile in __________________________ (material), with finish ____________________________ _________________ (see Material Description section) of characteristic size __________________ mm, as a flush closing profile for plasterboard walls. Family type _________________________ from the Profilitec company as a skirting board support profile made of the same material as the floor to be applied to the wall, to be supplied and installed properly, following the methods and fields of application suggested by the manufacturer. Profile length: 2700...