Catalogs >
PROFILITEC >
Multicover CLG-CLF

Multicover CLG-CLF
1Pages

Catalog excerpts

MULTICOVER represents two further possibilities of alternative fixing for the junction and edging profiles series CLG and CLF, with wood clad finish. These profiles are actually available also in the drilled version for fixing with screws and dowels, or self adhesive, provided with a special high quality elastomer adhesive for easier application. For installation just cut the profile to the required length, remove the protective film and press downward on the profile until it is fixed firmly. For a good hold the support must be sound, smooth, clean, dry and free from grease and loose materials. TM Illustrated scale dimension 1:1 Profile with a melamine wood tone in 8 different varieties. Good tolerance to abrasion comparable to most melamine coverings. The melamine embossing on the aluminium is particularly smooth, therefore it remains quite clean and blends well with the flooring tone. Installation for self-adhesive version: 1) Check if support is sound, smooth, clean, dry and free from grease and loose materials. 2) Cut profile to the required length and remove the protective film. 3) Press downwards on the profile until it is fixed firmly. Do not hammer. Installation for pre-drilled version: 1) Cut profile to the required length and mark the holes position. 2) Insert the dowels and fix in using suitable flare head screws. MULTICOVER CLG 370* Aluminium Wood Cladding Finish Junction profiles for floors at the same height. Whitened Maple Beech Oak Cherry L. walnut Dark walnut Wengé Material: Extruded Aluminium Laminate cov. Length: 2,70 metres : 0,90 / 1,35 metres MULTICOVER CLF 450* Aluminium Wood Cladding Finish Terminal profile for mismatching floors ranging between 6 ÷ 11 mm. Material: Extruded Aluminium Laminate cov. Length: 2,70 metres : 0,90 / 1,35 metres Whitened Maple Beech Oak Cherry L. walnut Dark walnut Wengé : Pre-cut length available in SELFLINE kit L= 0,90/1,35 m multicover wood

Open the catalog to page 1