Datasheet MULTICLIP CLP PRODUCT DESCRIPTION The patented MULTICLIP CLP 270 aluminum perimeter profile allows floor edge finishing without baseboards. A 16mm internal cavity allows 5mm of differential movement. This profile is also suitable along sliding door tracks and as entrance mat framing. TECHNICAL FEATURES Length: 2,70 meters 1 clip - H=6 to 10 mm 2 clip - H=11 to 15 mm 3 clip - H=16 to 20 mm MATERIAL DESCRIPTION Aluminum The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. ANODIZED ALUMINUM: The anodic oxidation process provides protection against corrosion caused by atmospheric agents, without involving galvanic treatments. According to the EN 12373 standard, the profiles are treated with preventive processes that make them uniformly opaque, subsequently they are coloured through an electro-chemical oxidation process in the standard colours Silver, Gold, Bronze, Copper and Titanium with a thickness of up to 10 microns. SUBLIMATED ALUMINUM: The finish obtained through the painting and sublimation process is a process that consists of a first phase corresponding to the powder coating process and a second phase that uses sublimation transfer technology. This allows images or decorations to be transferred from a film to an object, usually metal, using heat and pressure, creating a high-quality and durable aesthetic finish. In addition to presenting realistic decorative effects, it also retains the characteristics of an electrostatic painting based on polyester powders.

prof ill vec positive profile APPLICATION 1. Choose the MULTICLIP profile (finishing), the CLB profile (base) and the CL profile (adjustment clip); 2. Cut the profiles to the desired length; 3. Spread the adhesive in the application area of the base or fix it with screws; 4. Lay the floors by resting them on the sides of the base, leaving the space that will house the CL profile (clip) free; 5. Insert the CL profile into the appropriate dovetail slot of the MULTICLIP finishing profile; 6. Finally, fit the newly coupled profiles (MULTICLIP + CL) into the base (CLB) by applying progressively greater...

WARNINGS These profiles should be handled with care, using cut-resistant gloves. The indications and prescriptions herein, while corresponding to our experience, are to be considered purely indicative and must be confirmed by exhaustive practical applications. Profilitec declines any responsibility for any damage to people or things resulting from improper use of the products. The user is required to determine whether or not the product is suitable for use and assumes all responsibility arising from incorrect installation of the material. BILL OF QUANTITIES ITEM Supply and installation of profile...