Catalogs >
PROFILITEC >
Listec LIA

Listec LIA
1Pages

Catalog excerpts

The compensating shims for listellos are patented accessories in aluminium which can be installed on all the aluminium listellos by Profilitec spa ( both the standard and the Glittered ones). The shims are suitable for the 15 mm version (it needs to be cut and the suitable one is used). The shim enables a double use as it can be placed in the lower part of the profile thus matching 8 to 9,5 mm thickness or upside down to match 8 to 11,5 mm thickness. In this way you can adapt the 8 mm thick listellos also with 10 or 12 mm tiles, thus avoiding the difficult and not always well done compensation with the tiling glue. Just with a single accessory you will then get a perfect listello for tiles of 8, 10 and 12 mm. INSTALLATION SCHEMES: SHIM FOR LISTELLOS-LIA 15 The compensating shim is made from a single piece which need to be cut to be used. It matches both our 15 mm wide listello and that 10 mm wide. Once cut, you will have to decide whether to put it on one side- to compensate 8 to 9,5 mm ( for 10 mmm tiles) or on the other side, that compensating 8 to 11,5 mm ( suitable for 12 mm tiles). We suggest to use 1 shim every 50 cm to keep the proper alignment along the whole listello length. wall covering shim for listellos L=mm Material: Aluminium Finish: Natural

Open the catalog to page 1

Listec LIA 1Pages

Catalog excerpts

All PROFILITEC catalogs and technical brochures

Listec LIA
1Pages