Datasheet LISTEC LI15 - LI15G PRODUCT DESCRIPTION The LISTEC LI 15 aluminum decorative profile is designed for ceramic tile wall coverings. The unique squared section perfectly aligns with modern rectified tile edges. Due to the 8mm profile thickness and interlocking plastic spacers, the strip profile is adaptable to any tile thickness over 7mm. Internal and external corners may be finished with SQUAREJOLLY, ROUNDJOLLY or KERAJOLLY joint profiles, avoiding 45' mitered corners. For information on the plastic spacers (LIA). TECHNICAL FEATURES Length: 2,70 meters Glitter Aluminum MATERIAL DESCRIPTION Aluminum The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. ANODIZED ALUMINUM: The anodic oxidation process provides protection against corrosion caused by atmospheric agents, without involving galvanic treatments. According to the EN 12373 standard, the profiles are treated with preventive processes that make them uniformly opaque, subsequently they are coloured through an electro-chemical oxidation process in the standard colours Silver, Gold, Bronze, Copper and Titanium with a thickness of up to 10 microns. BRIGHT POLISHED ALUMINUM: The brightening process consists of a mechanical-chemical polishing treatment and the subsequent anodic bath in Gold, Chrome, Copper and Titanium colors. The resulting profiles retain the same corrosion resistance as standard anodized profiles.

1. Spread the adhesive in the profile application area with the help of a notched trowel; 2. Cut the profile to the required length and place it so that the base sinks into the adhesive, pressing and aligning it; 3. Apply an additional layer of adhesive to the perforation and in the cavities of the vertical section of the profile in contact with the edge of the floor; 4. Generally leave a space of about 2 mm between the profile and the edge of the tile to be filled later with sealant or grout; 5. Remove any adhesive residue from the profile immediately. N.B.: Aluminum profiles offer limited resistance...

CLEANING AND MAINTENANCE ALUMINIUM: Aluminum requires no special maintenance. For cleaning, use colorless alcohol diluted in water or neutral detergents, avoiding acidic ones (e.g., hydrochloric or hydrofluoric acid); use non-abrasive sponges or cloths to avoid damage. We recommend not applying cleaners directly to surfaces. After cleaning, rinse with water and dry immediately with a soft cloth. Avoid polishes. Quickly remove residual cement or grout to protect the surface. WARNINGS These profiles must be handled with care, taking care to use cut-resistant gloves. The instructions and requirements...