Catalogs >
PROFILITEC >
Linear Drain LD

Linear Drain LD
2Pages

Catalog excerpts

Profilitec introduces a new exciting solution to its product range dedicated to modern building environments, extending the use of large format ceramic tiles in the bathroom. PLANO IL= Polished Stainless Steel IS= Brushed Stainless Steel Suitable for coverings from 9 to 30 mm. Linear Drain is a system for walk-in showers which, eliminating the customary shower tray, allows the creation of design solutions. A full range comprising 6 different lengths, various grill types and finishes to personalize any bathroom environment. TECHNIC IX= Sand Stainless Steel Suitable for coverings from 9 to 30 mm. The system consists of a technical evacuation unit plus the chosen grating Note: Only the ABS version is supplied pre-assembled and its code includes siphon and grating. accessories: Grating connector straight extension 90° Connection piece 10 cm TILE Grating completed by the tile of your choice. Suitable for coverings from 9 to 30 mm. Grating connector 90° 90° Connection da 10x10 cm LEVEL 3 IS= Brushed Stainless Steel. Suitable for coverings from 3 to 30 mm. DRAIN PLUG LINEAR DRAIN The siphon is provided with the waterproof membrane collar . I-Cube An ingenuous system which reduces foam levels produced using the shower. It helps to keep the drain clean and releases a pleasant aroma. Not available for the Level 3 and Tile grating. Riser blocks (for height adjustment) Water outflow system A patented system of water buffers, connected to the grating, manages the speed of the water run off from the central part in a controlled manner. This system is not present in the grating Level 3 and Tile. Stainless Steel 304 3 and 1,5 mm thick Single unit of stainless steel Technical evacuation system built out of a single piece, avoiding welding seams offering reliability and resistance over time. Stainless Steel 316 or ABS 1,25 mm thick Pre-glued waterproof collar The system provides a waterproof membrane pre-glued to the rim, a time saving solution to reduce the risk of infiltration. To complete the waterproofing of the floor and wall, we advise to use as an alternative classic waterproofing systems the Foiltec waterproof membrane with its relative corner and connection pieces. * Grating available also in version 316 on request. Capacity 9 mm water column: Drain width: Floor covering thickness: Grating width: 54 mm (excluding floor covering) draining systems linear for shower trays Total height from 3 to 30 mm (based on choice of grating) linear for shower trays draining systems

Open the catalog to page 1

Mounting Instructions: Renews the bathroom environment The bathroom feels more spacious and harmonious 1 Achitectural barriers are removed Against or away from the wall Simplified installation Adaptable to different flooring material heights Check the thickness of the covering to be laid. Check the dimension of the area in question, the position of the water outlet, cut the polyester block to the required size and proceed to glue the block. Cut the central part of the block to create the space for the water pipe. 2 Insert the drain into the polyester block. Connect the earth wire and the...

Open the catalog to page 2

Linear Drain LD 2Pages

Catalog excerpts

All PROFILITEC catalogs and technical brochures

Linear Drain LD
2Pages