Datasheet LEVELTEC RP PRODUCT DESCRIPTION The LEVELTEC RP edge profiles can be used as trimming or to join floor types of different thicknesses. This profile section hides tile and carpet edge imperfections. LEVELTEC RP profiles have a sectional height ranging from 4.5 to 12.5mm and can compensate for elevation differences of 3 to 14mm. This product is equipped with heavy-duty adhesive, ready for installation. It is also available in a pre-drilled version, fastened with flathead screws. Smooth and grooved LEVELTEC profiles in varying widths and heights transition floors of different elevations. Their sectional thickness makes them especially suitable for high traffic areas and the end detailing allows frictionless contact between the profile and floor. TECHNICAL FEATURES Length: 2,70 meters Stainless Steel

positive profile MATERIAL DESCRIPTIONStainless Steel Steel profiles are made by cold forming sheets of constant thickness, thus differing from the corresponding aluminum and brass versions made by hot extrusion, while maintaining their application and dimensional characteristics. Stainless steel effectively resists high mechanical stress and is particularly suitable for use in the chemical, food, and hospital sectors, where hygiene, durability, and chemical resistance are essential. Normally produced with a semi-gloss finish, a brushed finish can also be achieved by partially removing material...

positive profile MATERIAL DESCRIPTIONBrass Profiles made from CW618N (EN 12167) brass alloy are characterized by high resistance to mechanical stress, making them particularly suitable for heavy-traffic applications, such as industrial settings and at expansion joints. Brass is resistant to most chemical agents commonly encountered during the installation of ceramic coverings. However, in the presence of humidity or aggressive substances, the surface may develop superficial oxidation, which can be removed using a standard polishing product. These profiles can be manufactured through either hot...

Profiles applied with screws and plugs APPLICATION 1. Cut the profile to the required length; 2. Position the profile and mark the position of the holes, possibly using the holes present in the profile if in the perforated version; 3. Insert the dowels if the support requires it, fix the profile using countersunk screws (for threshold cover profiles use 3 mm diameter screws and 5 x 25 mm dowels). N.B.: Aluminum profiles offer limited resistance to alkaline substances, so their use must be evaluated according to the expected chemical aggressions. Aluminum profiles in contact with cementitious...

BILL OF QUANTITIES ITEM Supply and installation of profile in __________________________ (material), with finish ____________________________ ___________________ (see Material Description section) of characteristic size __________________ mm. Profile with connected upper part for an ideal floor finish. Family type _________________________ from the Profilitec company as a finishing and connection profile between existing floors and new flooring to be supplied and installed properly, following the methods and fields of application suggested by the manufacturer. Profile length: 2700 mm Profile...