Catalogs >
PROFILITEC >
Leveltec RP-RPR

Leveltec RP-RPR
1Pages

Catalog excerpts

LEVELTEC RP is conceived as terminal and joining profile for floors at different heights. This product can also cover slight imperfections due to cuts or chipping of different materials such as wood floors joining to linoleum or carpeting. LEVELTEC RP series comprises different height adjustments ranging from a 4,5 ÷ 12,5 mm scale and to 3 ÷ 14 mm mismatch. The product is usually sold with a ready to fix high quality self-adhesive for DIY installation. Available also in the pre-drilled version, to be fixed with screws and dowels. Installation for self-adhesive version: 1) Check if support is sound, smooth, clean, dry and free from grease and loose materials. 2) Cut profile to the required length and remove the protective film. 3) Apply the profile by pressing on it until it is firmly fixed – do not hammer. Installation for pre-drilled version: 1) Cut profile to the required length and remove the protective film. 2) Insert and fix the flare head screws LEVELTEC RP-OL* Polished Brass This profile is adaptable to various heights of connecting floors thanks to the availability of four different models. This profile is supplied with a polished surface. HxB Material: Extruded Brass The profile RPR 39, thanks to its reversible form can be used on both sides, joining heights from 8 to 14 mm. Self-adhesive (A*A), Drilled (A*F) version. Length: 2,70 metres : 0,90 / 1,35 metres Material: Extruded Brass 8 Finish: Polished (OL*) Length: 2,70 metres : 0,90 / 1,35 metres Material: Extruded Brass 10 Finish: Polished (OL*) Length: 2,70 metres : 0,90 / 1,35 metres Material: Extruded Brass 12,5 Finish: Polished (OL*) Length: 2,70 metres : 0,90 / 1,35 metres Material: Extruded Brass Finish: Polished (OL*) Length: 2,70 metres : 0,90 / 1,35 metres : Pre-cut length available in SELFLINE kit L= 0,90/1,35 m junction on existing floors

Open the catalog to page 1