Datasheet KERAJOLLY KJ PRODUCT DESCRIPTION KERAJOLLY profiles are designed to define sharp external wall corners and prevent chipping and cracking of fragile single-fired ceramic tiles. Easy to install, simply choose the size based on the thickness of the selected tile. KERAJOLLY trim profiles protect ceramic tiled wall corners against impact while guaranteeing safety standards and durability. The KERAJOLLY color range can also be matched with LISTEC decorative strips, proposing endless design possibilities. TECHNICAL FEATURES Length: 2,70 meters Synthetic Resin MATERIAL DESCRIPTION Aluminum The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. ANODIZED ALUMINUM: The anodic oxidation process provides protection against corrosion caused by atmospheric agents, without involving galvanic treatments. In accordance with the EN 12373 standard, profiles undergo preliminary treatments that create a uniformly matte surface. They are then colored through an electrochemical oxidation process in standard finishes: Silver, Gold, Bronze, Copper, and Titanium, with a coating thickness of up to 20 microns. BRIGHT POLISHED ALUMINUM: The brightening process consists of a mechanical-chemical polishing treatment and the subsequent anodic bath in Gold, Chrome, Copper and Titanium colors. The resulting profiles retain the same corrosion resistance as standard anodized profiles. POWDER COATED ALUMINUM: Powder coating begins with a chromium phosphate pre-treatment, followed by electrostatic application of polyester powders that offer high resistance to U.V. rays and atmospheric agents. The entire surface of the profile is coated with an average thickness of approximately 60 microns. A hot cross-linking polymerization process is then carried out to ensure maximum chemical and mechanical resistance.

positive profile AT AR AB AGR AO ASS ASB ATB ARB AOB AGRS AMSB ASSB ADSB KJC100AT kerajolly >> KJ in Anodized Aluminum kerajolly >> KJ in Brushed Anodized Aluminum keracapsule >> KJC in Anodized Aluminum keracapsule >> KJC in Brushed Anodized Aluminum Via Scotte, 3 - 36033 Isola Vicentina (Vicenza), ITALY e-mail: [email protected] Profilitec Corp. Profilitec France e-mail: [email protected] e-mail: [email protected] Profilitec Iberica, S.L.U. e-mail: [email protected]

keracapsule >> KJC in Powder Coated Aluminum Profilitec S.p.A. Profilitec Corp. Profilitec France Via Scotte, 3 - 36033 Isola Vicentina (Vicenza), ITALY e-mail: [email protected] e-mail: [email protected] e-mail: [email protected] Profi|itec lberica, S.L.U. e-mail: [email protected]

kerajolly >> KJ in Embossed Powder Coated Aluminum Modern Line keracapsule >> KJC in Embossed Powder Coated Aluminum Modern Line Via Scotte, 3 - 36033 Isola Vicentina (Vicenza), ITALY e-mail: [email protected] Profilitec Corp. Profilitec France e-mail: [email protected] e-mail: [email protected] e-mail: [email protected]

keracapsule >> KJC in Embossed Powder Coated Aluminum Match Line Profilitec S.p.A. Profilitec Corp. Profilitec France Via Scotte, 3 - 36033 Isola Vicentina (Vicenza), ITALY e-mail: [email protected] e-mail: [email protected] e-mail: [email protected] Profi|itec lberica, S.L.U. e-mail: [email protected]

Via Scotte, 3 - 36033 Isola Vicentina (Vicenza), ITALY e-mail: [email protected] Profilitec Corp. Profilitec France e-mail: [email protected] e-mail: [email protected] e-mail: [email protected]

positive profile MATERIAL DESCRIPTIONBrass Profiles made from CW618N (EN 12167) brass alloy are characterized by high resistance to mechanical stress, making them particularly suitable for heavy-traffic applications, such as industrial settings and at expansion joints. Brass is resistant to most chemical agents commonly encountered during the installation of ceramic coverings. However, in the presence of humidity or aggressive substances, the surface may develop superficial oxidation, which can be removed using a standard polishing product. These profiles can be manufactured through either hot...

1. Choose the H-size profile corresponding to the thickness of the covering to be laid, taking care to ensure that the profile does not exceed the edge of the covering but is positioned 0.5 to 1 mm lower; 2. Spread the adhesive in the profile application area with the help of a notched trowel; 3. Cut the profile to the required length and place it with the perforated side in the adhesive, pressing and aligning it; 4. Apply an additional layer of adhesive to the perforation and in the cavities of the vertical section of the profile in contact with the edge of the cladding; 5. Tend to leave a gap...

CLEANING AND MAINTENANCE ALUMINUM: Aluminum requires no special maintenance. For cleaning, use colorless alcohol diluted in water or neutral detergents, avoiding acidic ones (e.g., hydrochloric or hydrofluoric acid); use non-abrasive sponges or cloths to avoid damage. We recommend not applying cleaners directly to surfaces. After cleaning, rinse with water and dry immediately with a soft cloth. Avoid polishes. Quickly remove residual cement or grout to protect the surface. BRASS: Brass does not require special maintenance and is easily cleaned with alcohol diluted in water or with neutral detergents,...