profilit.ec positive profile PRODUCT DESCRIPTION When the concrete cast has been completed, control joints must be cut to avoid random cracking due to temperature changes and drying shrinkage. Equipped with an embedded fiberglass thread, JOINTEC GT synthetic resin profiles are designed to be inserted directly into the control joints. The innovative fiberglass thread prevents lengthening or shrinking of the profile, which is typical of traditional control joint fillers. The flexible shape of the profile section can be inserted into cuts 3.5 - 5.5mm wide. Resinflex + fiberglass thread B = 3,5 mm MATERIAL DESCRIPTION Resinflex + fiberglass thread RESINFLEX Plasticized thermoplastic synthetic resin: Made from primary resin, its polyvinyl chloride composition provides high resistance and compatibility with Resinil in the COEXTRUSION process we use in most expansion joints. Thanks to the nature of the plasticizers used, the material maintains its essential elasticity characteristics over time. jointec >> GT Joint seal for industrial floors cut in site

APPLICATION 1. Adopt the profile with a size suitable for the thickness of the structure, ensuring that the entire thickness is covered by the joint; 2. Position the profile in contact with the finished structure and proceed with installation or insert the joint into position ensuring that it protrudes by 2/3 mm from the final cladding surface; 3. Tile normally in the area in contact with the joint and hammer with the aid of a wooden spacer until it fits perfectly flush with the newly laid joint covering; 4. Grout the joint between the tile and the profile with the appropriate glue. 5. Remove...