profilit.ec positive profile PRODUCT DESCRIPTION These are modular expansion joint covers, patented custom-made according to the required widths. They are particularly suitable as expansion joint covers for walls or ceilings, supplied both in the flat and in the corner version. This profile consists of two lateral elements which work both as a fixing system, with screws and dowels, and as restraining and movement devices for the aluminium profile, which is custom-made according to the required width. They are supplied in Silver anodised aluminium. MATERIAL DESCRIPTIONAluminum The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. RESINPRENE Vulcanized rubber: Resinprene vulcanized rubber is a modified EPDM-based compound whose particular characteristics we highlight: Optimal mechanical properties in an operating temperature range from -40 °C to + 150 °C Resistance to aqueous fluids, oils, and hydrocarbons. Low permanent deformation in compression and tension. Excellent resistance to aging. Exceptional resistance to dynamic fatigue and tearing. The intrinsic characteristics of the material make it particularly suitable for the production of profiles requiring high performance over time, both indoors and outdoors.

positive profile jointec >> GS in Aluminum + Insert 1. Choose the profile according to the loads and expansion to which it will be subjected. If necessary, level the subfloor using a layer of plastic mortar with a width of 10 cm approx. Calculating in advance that when the laying is completed the joint will be perfectly flush with the finished floor; 2. Spread the adhesive in the profile application area with the help of a notched trowel; 3. Cut the profile to the required length; 4. Align the joint, checking that it is perfectly linear. If present, fix the wings to the substrate using mechanical...

BILL OF QUANTITIES ITEM Supply and installation of profile in __________________________ (material), with finish ____________________________ _________________ (see Material Description section) of characteristic size __________________ mm, equipped with a wide support base with mobile elements connected by an EPDM insert which facilitates perfect fixing and a safe surface suitable for pedestrian and vehicular passage. Family type _________________________ from the Profilitec company as a load-bearing structural joint to be used on floors between semi-attached parts of buildings or between different...