profilit.ec positive profile JOINTEC, the structural expansion joints series, are available in the "standard" or ribbed Resinprene insert version(for width 37 mm). Resinprene is a special vulcanized rubber EPDM and Neoprene based, with excellent mechanical performance in an operating temperature interval of -40°C to +150°C. Low permanent deformation to compression and tensile stress. Excellent resistance to ageing. Roll length 40 meters MATERIAL DESCRIPTIONResinprene Insert RESINPRENE Vulcanized rubber: Resinprene vulcanized rubber is a modified EPDM-based compound whose particular characteristics we highlight: Optimal mechanical properties in an operating temperature range from -40 °C to + 150 °C Resistance to aqueous fluids, oils, and hydrocarbons. Low permanent deformation in compression and tension. Excellent resistance to aging. Exceptional resistance to dynamic fatigue and tearing. The intrinsic characteristics of the material make it particularly suitable for the production of profiles requiring high performance over time, both indoors and outdoors. jointec >> GI Insert in Resinprene standard jointec >> GIL Insert in Resinprene with smooth surface

APPLICATION 1. Insert the profile into the seat of the joint to be replaced using a wide flat chisel CLEANING AND MAINTENANCE SYNTHETIC RESIN: Thermoplastic synthetic resin does not require any special maintenance. It can be easily cleaned with colorless alcohol diluted in water or with normal detergents, provided they are not acid-based, also diluted in water; rinse with water only. Use non-abrasive sponges or cloths to avoid scratching the surface. WARNINGS The indications and specifications contained herein, while consistent with our experience, are purely indicative and require confirmation...