profilit.ec positive profile These are structural joints entirely made of aluminium. Jointec GH is a joint suitable for truck and fork-lift high passage in civil and industrial use. Designed to bear structural movements of large sized buildings or compounds of buildings. They must be installed on pre-existing surfaces, also vertically, over the spaces existing between two semi-detached parts of a smaller entity sized building or between different beam bays. They can connect and lock these interspaces adjusting themselves upwards, downwards and even transversely, according to the shrinkage-settlement movements of the whole building, be they cyclic or permanent. Within the bay frame created with the structural joints, a further surface subdivision with a suitable pattern of movement / expansion joints should always be provided for. Detailed mounting instructions can be supplied on request. MATERIAL DESCRIPTION The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes.

APPLICATION 1. Choose the profile according to the loads and expansion to which it will be subjected. If necessary, level the subfloor using a layer of plastic mortar with a width of 10 cm approx. Calculating in advance that when the laying is completed the joint will be perfectly flush with the finished floor; 2. Spread the adhesive in the profile application area with the help of a notched trowel; 3. Cut the profile to the required length; 4. Align the joint, checking that it is perfectly linear. If present, fix the wings to the substrate using mechanical or chemical expansion plugs sized according...

BILL OF QUANTITIES ITEM Supply and installation of profile in __________________________ (material), with finish ____________________________ ___________________ (see Material Description section) of characteristic size __________________ mm, equipped with a wide support base with countersunk holes which facilitates perfect fixing and a safe surface suitable for pedestrian and heavy vehicular passage with mobile interlocking elements inside with horizontal, vertical and transverse movement. Family type _________________________ from the Profilitec company as a load-bearing structural joint to...