Datasheet JOINTEC GE - GEL PRODUCT DESCRIPTION JOINTEC GE aluminum structural expansion joints are composed of twin metal profiles joined by a central synthetic rubber insert. Designed to bear loads of large scale buildings or building compounds, they can be installed in the interstitial space between two sections of a building or between two bays. This technical joint links these interspaces, moving vertically and horizontally to accommodate a building’s structural and material settlement. The structural bays defined by this profile should be further subdivided with smaller scale movement / expansion joints, chosen according to the expected use and flooring type. TECHNICAL FEATURES Length: 4,00 meters Aluminum + Resinprene Insert Aluminum + Resinprene Insert MATERIAL DESCRIPTION Aluminum + Resinprene Insert The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. RESINPRENE Vulcanized rubber: Resinprene vulcanized rubber is a modified compound based on EPDM and NEOPRENE whose particular characteristics we highlight: Optimal mechanical properties in an operating temperature range from –40 °C to + 150 °C Resistance to aqueous fluids, oils, and hydrocarbons. Low permanent deformation in compression and tension. Excellent resistance to aging. Exceptional resistance to dynamic fatigue and tearing. The intrinsic characteristics of the material make it particularly suitable for the production of profiles requiring high performance over time, both indoors and outdoors.

positive profile jointec >> GE in Aluminum + Resinprene insert + GI370 The joints are supplied unassembled from the rubber insert. To order the insert with the smooth surface add the letter S after the article code. Ex: GE500AN51S400. jointec >> GEL in Aluminum + Resinprene insert + GI470 The joints are supplied unassembled from the rubber insert. To order the insert with the smooth surface add the letter S after the article code. Ex: GE500AN51S400. APPLICATION 1. Choose the profile according to the loads and expansion to which it will be subjected. If necessary, level the subfloor using a layer...

BILL OF QUANTITIES ITEM Supply and installation of profile in __________________________ (material), with finish ____________________________ _________________ (see Material Description section) of characteristic size __________________ mm, equipped with a wide perforated base which facilitates perfect fixing and a safe surface suitable for pedestrian and vehicular passage with replaceable rubber insert. Family type _________________________ from the Profilitec company as a load-bearing structural joint to be used on floors between semi-attached parts of buildings or between different spans,...