Catalogs >
PROFILITEC >
Jointec GC

Jointec GC
1Pages

Catalog excerpts

PVC joint patented conceived to create a “grid” at floor level for cement industrial paving, made through forming and smoothing with the vibrating float. First fit joints at the required height in bays of generally 5 x 5 metres. Proceed then casting concrete and forming it leaning directly on the joint which will work as level line. It will not be necessary to make subsequent saw cuts and filling in the floors, thus completing the job properly at one go. Along the perimeter there must necessarily be a sufficient dilatation space. Using the joint GC, plus the soft profile GCP you will get at one go both the required level on which to place the shafts, the necessary dilatation and a nice finish of the perimeter, avoiding need of further skirting. Illustrated scale dimension 1:1 Illustrated scale dimension 1:2 Thanks to its modularity, the joints GC can be coupled and mounted with the suitable PVC profile GCR, thus obtaining a double-performing control joint, with high absorption and movement qualities, as required for example in correspondence of slab casting discontinued placements. The application drawing here below shows how the joint controls the movement zones and possible fissuring points. Quick assembly, performing and long lasting, time saving with a perfect result. JOINTEC GC 80 P23 Co-Extruded Synthetic Resin Base module in co-extruded synthetic resin, rigorously controlled during production. H=mm Material: PVC Colour: Cement grey (P23) Length: 2,50 metres, a richiesta 5,00 mt JOINTEC GCP 80 P23 Synthetic Resin Resinflex Profile to match with the base modul GC to form a surface perimeter joint which can replace traditional skirtings. JOINTEC GCR 80 P23 Synthetic Resin Resinflex Profile to mount with two base moduls GC placed back-to-back, creating a joint for breaks in the screeding. expansion joints concrete floors B=mm Material: Resinflex Colour: Cement grey (P23) Length: in roll L= 100 mt Material: Resinflex Colour: Cement grey (P23) Length: in roll L= 100 mt slab casting expansion joint

Open the catalog to page 1