Datasheet FILOJOLLY RJF PRODUCT DESCRIPTION The patented FILOJOLLY profile is specifically designed for outside edges, minimizing the metal reveal. Designed for mitered tiles cut at a 45° angle or for square 4.5mm glass mosaics, the result is an almost invisible outside edge detail. TECHNICAL FEATURES Length: 2,70 meters MATERIAL DESCRIPTION Aluminum The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. ANODIZED ALUMINUM: The anodic oxidation process provides protection against corrosion caused by atmospheric agents, without involving galvanic treatments. According to the EN 12373 standard, the profiles are treated with preventive processes that make them uniformly opaque, subsequently they are coloured through an electro-chemical oxidation process in the standard colours Silver, Gold, Bronze, Copper and Titanium with a thickness of up to 10 microns. BRIGHT POLISHED ALUMINUM: The brightening process consists of a mechanical-chemical polishing treatment and the subsequent anodic bath in Gold, Chrome, Copper and Titanium colors. The resulting profiles retain the same corrosion resistance as standard anodized profiles.

1. Choose the profile of size H corresponding to the thickness of the covering to be laid, paying absolute attention that the profile must align with the 45° cut edge of the tile; 2. Spread the adhesive in the profile application area with the help of a notched trowel; 3. Cut the profile to the required length and place it with the perforated side in the adhesive, pressing and aligning it; 4. Apply an additional layer of adhesive to the perforation and in the cavities of the vertical section of the profile in contact with the edge of the cladding; 5. Generally leave a space of about 2 mm between...

CLEANING AND MAINTENANCE ALUMINIUM: Aluminum requires no special maintenance. For cleaning, use colorless alcohol diluted in water or neutral detergents, avoiding acidic ones (e.g., hydrochloric or hydrofluoric acid); use non-abrasive sponges or cloths to avoid damage. We recommend not applying cleaners directly to surfaces. After cleaning, rinse with water and dry immediately with a soft cloth. Avoid polishes. Quickly remove residual cement or grout to protect the surface. WARNINGS These profiles should be handled with care, using cut-resistant gloves. The indications and prescriptions herein,...