Catalogs >
PROFILITEC >
DIC-DIT

DIC-DIT
1Pages

Catalog excerpts

Perforated plastic spacers for a regular and gauged grout joint tiling in wall and floor coverings. Realised in synthetic material resistant to chemical agents. Available in all the sizes normally required by tile joints. Their antifloating shape is conceived to keep the spacer imbedded into the fresh grout during tiling and beating. Delivered in 500 pcs bags organized in dispenser displays. New ‘Dispenser’ boxes make it easier to take out cross and “T”-shaped spacers for tile laying. The contents size is stamped on every plastic bag you pull out from the new front dispenser. This enables to have always an ordered warehouse of all sizes, helping the stock recovery, with the right size and the item code always at hand. The boxes are superimposable and multiple of a pallet to optimise the transport and the stocking. dispenser DIC-DIT Note: The spacers colours could be changed compared to those reported in the pictures DIC/DIT spacers requirement scheme Tile size (cm.): Quantity for mq.: Cross shaped spacer +: Quantity for mq.: Cross shaped spacer +: CROSS shaped spacer DIC Manufactured in polypropylene. 4 mm thickness for the spacers 1-2-3-4-5 mm wide, 6 mm for the DIC 70 and 8 mm for the DIC 100. accessories spacers Frontal content size label for an immediate stock check. Material: Polypropylene “T” shaped spacers DIT Manufactured in polypropylene. 4 mm thickness for the spacers 1-2-3-4-5 mm wide, 6 mm for the DIT 70 and 8 mm for the DIT 100. Wedge DIS Manufactured in polypropylene. 5 mm height. Helps to compensate possible screed level differences.

Open the catalog to page 1