profilit.ec positive profile This is a profile used in industrial and commercial floorings, in large continuous beam bays, and wherever two different bearing structures are linked together. A separation joint cover is often required to allow linear expansion movements of neighbouring materials. This profile is self-adhesive, with special adhesive glue which ensures remarkable movement absorption. For screw-and-dowel installation, it is advisable to fix the profile to one of the two structures drilling it along the length only on one side, leaving the other side free to scroll along the other profile . This profile is also suitable for bumper guards for stretchers in hospitals or as wall protection in schools and offices. Stainless Steel - Brass Steel profiles are made by cold forming sheets of constant thickness, thus differing from the corresponding aluminum and brass versions made by hot extrusion, while maintaining their application and dimensional characteristics. Stainless steel effectively resists high mechanical stress and is particularly suitable for use in the chemical, food, and hospital sectors, where hygiene, durability, and chemical resistance are essential. Normally produced with a semi-gloss finish, a brushed finish can also be achieved by partially removing material using rotating nylon and quartz fiber brushes. This process gives the surface a matte appearance without altering its characteristics. AISI 304 STAINLESS STEEL - EN X 5 CrNi 18 10 - DIN 1.4301: This steel belongs to the AUSTENITIC category and is the most widespread and commonly used alloy for products requiring high technical and performance characteristics. It is highly resistant to most chemical agents but may stain or darken superficially; a standard polishing product is sufficient to restore its original appearance. copritec >> CP in Stainless Steel AISI 304 - with adhesive copritec >> CP in Stainless Steel AISI 304 - without Adhesive

positive profile MATERIAL DESCRIPTIONAluminum The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. ANODIZED ALUMINUM: The anodic oxidation process provides protection against corrosion caused by atmospheric agents, without involving galvanic treatments. According to the EN 12373 standard, the profiles are treated with preventive processes that make them uniformly opaque, subsequently they are coloured through an electro-chemical oxidation process...

APPLICATION 1. Check that the substrate is solid, flat, clean, degreased and dry, verifying that the application temperature is not lower than 15°C in case of gluing; 2. Cut the profile to the required length; 3. Apply the adhesive (FIXXTEC) to the part of the profile to be adhesived, or remove the protective paper from the adhesive for self-adhesive versions, and position the profile correctly without further adjustments; 4. Apply the profile with uniform pressure without hammering; 5. Fixing with dowels must be done on one side of the profile only, placing a dowel every 30 cm and leaving the...

BILL OF QUANTITIES ITEM Supply and installation of profile in __________________________ (material), with finish ____________________________ _________________ (see Material Description section) with characteristic size __________________ mm, as an expansion joint cover for floors. Family type _________________________ from the Profilitec company as a joint cover to be used on floors, to be supplied and installed according to the rules of the art, respecting the methods and fields of application indicated by the manufacturer. Profile length: 4000 mm Profile SKU: ___________________________ Material:...