Datasheet COFLEX CR PRODUCT DESCRIPTION The patented COFLEX CR series optimizes the angular connections between floors and walls, guaranteeing the right expansion, creating a hygienic connection for cleaning and creating an acoustic cut to interrupt the propagation of noise between contiguous structures. COFLEX CR consists of a basic module in rigid/soft coextrusion (Art. CR 16) and additional modules (Art. KJ series) which fit inside the basic module, creating the height required by the thickness of the tile and guaranteeing the perfect fixing with the coating. By inserting the KJ in the rail of the CR16 coving there is an increase of 2 mm: for this reason the KJ profiles must be ordered 2 mm smaller than the thickness of the tile. TECHNICAL FEATURES Length: 2,70 meters Example assembled with KJ MATERIAL DESCRIPTION Synthetic Co-extruse basic module RESINIL Thermoplastic synthetic resin for COEXTRUSION: Made from primary resin whose composition based on Polyvinyl Chloride characterizes it for high resistance and optimized compatibility with regards to long-lasting adhesion with plasticized resins used in the coextrusion process, i.e. the permanent union of two materials with different degrees of Shore hardness. RESINFLEX Plasticized thermoplastic synthetic resin: Made from primary resin, its polyvinyl chloride composition provides high resistance and compatibility with Resinil in the COEXTRUSION process we use in most expansion joints. Thanks to the nature of the plasticizers used, the material maintains its essential elasticity characteristics over time.

coflex >> CRE Jointing and External corner pieces for CR coflex >> CRT Three-way junction for CR APPLICATION 1. Choose the KJ or TR profile to install to obtain the COFLEX CR assembly based on the thickness of the tile and the desired finish; 2. Cut the profiles to the desired length; 3. Insert the KJ or TR profiles into the grooves to obtain the complete COFLEX CR; 4. Apply the tile adhesive to the surface where the profile will be laid and position it by pressing it so that the bases of the support profiles are drowned in it; 5. Lay the tiles, taking care to align them with the profile and...

BILL OF QUANTITIES ITEM Supply and installation of profile in __________________________ (material), with finish ____________________________ ___________________ (see Material Description section) of characteristic size __________________ mm, with the function of concave sanitary cove and joint with a curvature radius of 16 mm and modular installation via interlocking with KJ type profiles to maintain a constant installation height of the covering. Profile family type _________________________ of Profilitec company as a closing and protection profile for the covering, to be supplied and installed...